Skip to main content

Acronis Backup & Recovery 10 issues with McAfeeEPO 4.0

Thread needs solution

We are experiencing issues with Mcafee EPO 4.0 on a Windows 2003 server.

We are receving the error messages below.

Error code: 36

Module: 64
LineInfo: 97675718d2b52ce4
Fields: path :domain\domainid
Message: Failed to set the logon information for the backup location.
--------------------
Error code: 20
Module: 4
LineInfo: f35f747b3b21fabf
Fields: function : WNetAddConnection3W, filename : \\server1\acronisbackups
Message: File I/O error.
--------------------
Error code: 65520
Module: 0
LineInfo: bd28fdbd64edb8b9
Fields: code : 2147943746
Message: Either a required impersonation level was not provided, or the provided impersonation level is invalid
--------------------
 
We contacted suppport but all they could do was point us to two support articles that did NOT fix the issue. We already have ABR v10 running on two Windows 2008 and one Windows 2003 servers without issue.  We didn't start having this issue until we installed ABR v10 on our EPO 4.0 box. So for now we will revert back to the 8.163 version we were running before.
 
Is anyone else out here having this issue? We may hold off upgrading any other of our systems.
 
I hope someone from a higher level of Acronis support reads this thead as it's definitely and issue with the upgraded version of Acronis ABR v10.
 
Thanks in Advance
 
Berri
 
0 Users found this helpful

Hello Berri,

Thank you for using [[http://www.acronis.com/enterprise/ | Acronis Corporate Products]]

It is not clear what you have done exactly, you should have mentioned the articles. This will help to avoid the duplication of the information.

Nevertheless, I can suggest you the following:

On the machine where Acronis Agent is installed, do the following:

  1. Go to Control Panel -> Administrative Tools -> Local Security Policy;
  2. On the Local Security Settings screen select Local Policies -> User Rights Assignment;
  3. Make sure that the NETWORK SERVICE user is present in the following policies:

- Adjust memory quotas for a process (or increase quotas in Windows 2000);

- Replace a process level token;

 

To add the NETWORK SERVICE user you will need to do the following:

  1. Right-click on the service and select Properties;
  2. Click Add User or Group;
  3. In the new window type in NETWORK SERVICE;
  4. Click OK.

If the program is running on a Domain Controller, then the default domain controller security settings are to be changed:

Go to Start -> All Programs -> Administrative Tools -> Domain Controller Security Policy -> Security Settings -> Local Policies -> User Rights Assignment Add the NETWORK SERVICE user as described above (if the user is not already there).

After that restart the following services:

* Go to Start -> Run -> services.msc

* Right-click on the following Acronis services, and click on Restart:

- Acronis Managed Machine Service;

- Acronis Remote Agent;

- Acronis Scheduler2 Service.

Thank you.

Oleg,

we already tried this. It did not resolve the issue.

 

FYI - we also installed the new ABR v10 to another Windows 2003 server without doing this anything you mentioned and it worked correctly.

So it still doesn't work.

:(

 

 

 

 

Hello Berry,

Thank you for your response.

In this case the issue needs a closer investigation. Please obtain the below information, contact our Live chat service with these files and make a reference to this thread. The issue should be escalated to Tier 2.

Please obtain the following files from both machines, from the computer with Management console and from the computer with Agent installed.

1) Download the file;
Run the downloaded file.
The gathered information will be put in adv_report.zip in the same folder, where the AcronisInfo was saved.
Running AcronisInfo may take up to 5 minutes.

2) Security logs from Windows Event logs (Computer Management -> Event viewer -> Security).
 

FYI - we also installed the new ABR v10 to another Windows 2003 server without doing this anything you mentioned and it worked correctly.

As far as you understand, the setting on both machines can differ.

Thank you.

 

Hi Oleg,

I ran the utility & got the logs you requested.

I could not find the link for live chat support. I already have a case #00287193.

If you could let the proper party please contact me.

Thank you.

 

Berri

 

Hi again Oleg,

I still haven't heard anything from tech support. Can one of the tech support folks give me a call.

 

Once again I am here in the US from 7a.m - 4p.m.

 

Thank you. 

Hello Berri,

Thank you for your responces.

Please send the files as an attachment to your reply to the notification you received (Thank you for contacting Acronis! We are sending you this letter to assure...). Let me know about it via PMs, I will take care about the request.

Thank you.