Need help locating driver
UR is requesting driver pci\ven_1022&dev_7812&subsys_76951462&rev03 for W7Ultimate (x86). I am unable to locate and/or determine device for which the driver is needed. Any help is welcome.
Using MSI A75A-G55 motherboard and Kingston 100V SSD [which does not seem to be the problem]. Motherboard has USB3, but I doubt this is the issue. I mention SSD and USB3 as they were not in system from which OS is being recovered.

- Log in to post comments

That was a great suggestion! and something I will use again. However, it did not solve my problem. It appears the driver is for USB 3.0 controller x64. The system being restored is 32-bit [x32/x86]. The USB 3.0 controller driver in x64 Windows 7 is the requested driver, a differently named driver is used in x32 Windows 7. {I installed clean versions of each OS, so I know they work.} It appears UR is incorrectly mapping the USB 2.0 (x32) driver from my old system to x64 USB 3.0 driver for new system.
If I disable USB {cannot disable 3.0 only} on new motherboard (MSI A75A-G55) I can boot the old x32 OS after UR, but have no USB devices and installing USB drivers does not fix the boot failure with USB enabled on the motherboard.
New motherboard has "onboard/internal" USB 3.0 {hard-wired} and "external/addon" 3.0 connectors. I'm going to disconnect the "external" USB and see if I can boot with USB enabled and then add/install the "external" USB. If the addition does not work I can live with "internal" only IF that works, as I migrate over to x64.
I wiped the old HD so I cannot 'go back' except through UR on the new system--I cannibalized my old system, I might have to rebuild if I cannot get around this problem or move to x64 'cold-turkey.' I paid for UR to avoid exactly this issue.
I'm thinking this is a bug in B&R/UR. I have another more critical system I need to migrate and it has certain applications unlikely to function x64 (and are not supported x64). I was hoping to have x32 and x64 available during migration to x64 supported versions of the applications.
Is there a way to 'force' driver substitution in UR? ANY ideas at all will be appreciated.
- Log in to post comments
