Skip to main content

Fileserver Backup hangs at 100%

Thread needs solution

Hello

Since one week, our Fileserver Backup with Acronis VmProtect does not run... The backup tasks starts, but then it hangs at 100% (see attached image).

The logfile is very short:
Backup ist fehlgeschlagen. Überprüfen Sie das Log für weitere Informationen.
1 Information 24.02.13 23:00:02 Der Task 'Backup' wurde gestartet.
2 Information 24.02.13 23:00:02 Task 'Backup' hat seinen Status von 'inaktiv' in 'läuft' geändert.
3 Information 24.02.13 23:00:04 Backup von VM(s).
4 Information 24.02.13 23:00:04 Task 'Backup' hat seinen Status von 'läuft' in 'inaktiv' geändert.
5 Fehler 24.02.13 23:00:04 Task 'Backup' fehlgeschlagen: 'Erstellen eines Backups fehlgeschlagen.
Zusätzliche Info:
--------------------
Fehlercode: 3
Module: 435
Zeileninfo: 555b5abba09501ce
Felder:
Nachricht: Erstellen eines Backups fehlgeschlagen.
--------------------
Fehlercode: 32786
Module: 114
Zeileninfo: 28314c961de7d32e
Felder:
Nachricht: Vorbereitung auf das Backup fehlgeschlagen.
--------------------
Fehlercode: 32768
Module: 114
Zeileninfo: 28314c961de7d2a1
Felder:
Nachricht: Instanzenliste ist leer.
--------------------'.

Can anyone tell me what to do so that this task runs ordinary?

Attachment Size
error.png 4.66 KB
0 Users found this helpful
frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 22
Comments: 3800

Hi PN_USER,

The error message indicates that the ID of the VM recorded in the task properties cannot be resolved properly which leads to inability to find this VM for backup. Usually this happens when there are some changes in the vSphere infrastructure (registration of vCenter/adding/removing VMs/creation of resource pools/vApps/etc.) and you need to edit the backup task and confirm the VM selection on the 1st step in order to respond to these changes. Also make sure that you have correct vCenter/hosts registered under Configure->ESXi hosts view. See also http://kb.acronis.com/content/36100 for additional troubleshooting steps regarding this error.

The task you see in vSphere client may be left after improper registration of vCenter or loosing connection to it from vmProtect Agent (the plug-in is registered in vCenter and if connection is lost then the tasks shown in vCenter will not be updated). You should re-enable the vCenter integration from Configure->ESXi hosts configuration.

Thank you.
--
Best regards,
Vasily
Acronis vmProtect Program Manager

Since the easter weekend I have a new error message concerning our fileserver backup...

Zusätzliche Info:
--------------------
Fehlercode: 3
Module: 435
Zeileninfo: 555b5abba09501ce
Felder:
Nachricht: Erstellen eines Backups fehlgeschlagen.
--------------------
Fehlercode: 32786
Module: 114
Zeileninfo: 28314c961de7d32e
Felder:
Nachricht: Vorbereitung auf das Backup fehlgeschlagen.
--------------------
Fehlercode: 353
Module: 149
Zeileninfo: a71592046cb2c5f6
Felder:
Nachricht: Backup der Gruppe fehlgeschlagen.
--------------------
Fehlercode: 2
Module: 218
Zeileninfo: 338a407ad20e0987
Felder:
Nachricht: Fehler während Ausführung der Backup- und Recovery-Engine aufgetreten.

Thanks for your help...

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 22
Comments: 3800

Hi PN_USER,

This error unfortunately doesn't mean anything useful - it's just general error stating that the backup has failed. Can you please check for the previous errors related to this task? They should contain the actual reasons for the failure.

Thank you.
--
Best regards,
Vasily
Acronis vmProtect Program Manager

Hi Vasily

Our Storage hadn't enough space, so we get the message that the disk was full.

Task XX fehlgeschlagen: 'Erstellen eines Backups fehlgeschlagen.
Zusätzliche Info:
--------------------
Fehlercode: 3
Module: 435
Zeileninfo: 555b5abba09501ce
Felder:
Nachricht: Erstellen eines Backups fehlgeschlagen.
--------------------
Fehlercode: 32786
Module: 114
Zeileninfo: 28314c961de7d32e
Felder:
Nachricht: Vorbereitung auf das Backup fehlgeschlagen.
--------------------
Fehlercode: 353
Module: 149
Zeileninfo: a71592046cb2c5f6
Felder:
Nachricht: Backup der Gruppe fehlgeschlagen.
--------------------
Fehlercode: 2
Module: 218
Zeileninfo: 338a407ad20e0987
Felder:
Nachricht: Fehler während Ausführung der Backup- und Recovery-Engine aufgetreten.
--------------------
Fehlercode: 1080
Module: 1
Zeileninfo: b43e776571144dee
Felder:
Nachricht: Endgültiges Ausführen des Aktionsergebnisses ist fehlgeschlagen.
--------------------
Fehlercode: 21
Module: 7
Zeileninfo: 9d2de1f088cbc4d7
Felder:
Nachricht: Durchführung der Aktion mit dem Archiv 'avfs:/smb?//jumbo2/backup/XX.TIB' fehlgeschlagen. Fehler: 'Datenträger ist voll.'.
--------------------
Fehlercode: 4
Module: 4
Zeileninfo: 1f40bc5f43e9ae30
Felder:
Nachricht: Datenträger ist voll.
--------------------'.

Then I changed the size for our backup volume and since the day after it I get the same message error as postet 1 hour ago... all messages are the same...

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 22
Comments: 3800

Hi,

If I correctly understood the last error (disk is full) has been addressed by increasing the volume size, so now the issue is different. Can you please send me the full log (View->Show Logs->"Save All To File" button in Logs tab) in private message so that I can check it and guide you in right direction?

Thank you.
--
Best regards,
Vasily
Acronis vmProtect Program Manager