Skip to main content

Konen von Festplatten an anderem PC

Thread needs solution

Hallo ich klone öfters SSD und HDDs. Jetzt ist es aber seit neuesten so das beim Klonen der Festplatten der Typ geändert wird. Das System auf dem ich klone ist UEFI. Daher ändert er beim Klonen einer anderen HDD leider immer auf GPT. Ich habe nicht gefunden wo ich ihm sagen kann das er es MBR lassen soll ist ja für einen anderen PC der kein UEFI Bios hat. Das Nervt etwas wenn man ältere PCs von HDD auf SSD umziehen lassen will. Habe mir jetzt mit einer Boot CD geholfen und Klone in den alten Rechnern dauert aber halt länger da kein USB 3.0.

Irgendwie kann ich auch keine Boot Sticks machen er formatiert die und sagt dann es ist ein Fehler aufgetreten. habe 3 USB Sticks versucht.

Also ich will 1 HDD auf eine SSD klonen in einem System wo eine SSD drinnen ist die UEFI installiert wurde. Die zu klonende HDDs und die SSD hängen an USB 3 und sind MBR

 

0 Users found this helpful

Stefan, welcome to these User Forums.

Cloning disks to another PC
Hi, I often clone SSD and HDDs. Now it is since the newest so that when cloning the hard disks the type is changed. The system I clone on is UEFI. Therefore, when cloning another HDD, it unfortunately always changes to GPT. I have not found where I can tell him that he should let it MBR is yes for another PC that has no UEFI Bios. The annoying thing if you want to move older PCs from HDD to SSD. I helped now with a boot CD and clones in the old computers but takes longer than no USB 3.0.

Somehow I can not make boot sticks, he formats them and then says it has an error. I tried 3 USB sticks.

So I want to clone 1 HDD to a SSD in a system where an SSD is inside the UEFI was installed. The HDDs to be cloned and the SSD are attached to USB 3 and are MBR

------------------------

How you boot the Acronis Rescue Media determines if the target drive will be migrated to GPT - if you boot in UEFI mode - MBR will be converted to GPT - if you boot in Legacy/CSM mode it will remain as MBR.

See the ATI 2016 User Guide: Migration method and look at the different migration options shown below this section of the guide.

2018-04-26 16_38_31 Migration.png

See also KB 58108: Acronis products: using USB sticks with more than 32GB capacity - you should ensure that your USB stick is smaller than 32GB and is formatted as FAT32 to be bootable.

You may also wish to post your question to the Deutsches Acronis Forum für Privatanwender if you prefer to use your native language.