Skip to main content

Externe USB Festplatte als Botmedium, aber wie?

Thread needs solution

Hallo.

 

Ich habe hier ein kleines Problem.

Ich habe hier Acronis True Image 2017 Build 8041 am laufen.

Ich kann auch wunderbar ein USB Stick als Bootmedium erstellen, ohne Probleme.

Was ich aber jetzt machen wollte: Ich wollte meine externe USB Festplatte, wo ich auch das Backup Image drauf habe, als Bootmedium einsetzen.

Dazu habe ich eine 2GB kleine FAt32 Partition erstellt, der Rest der Festplatte ist eine NTFS Partition für für das Backupimage.

Das Problem: Ich kann in dem "Bootable Rescue Media Builder" meine Fetsplatte mit der FAT32 partition nicht auswählen, um diese als Bootmedium verwenden zu können.

Daher meine Frage: Kann Acronis keine externen Festplatten zum booten verwenden?

Oder muss ich da noch was anderes machen?

Im Anhang habe ich mal ein Screenshot aus der Datenträgerverwaltung.

Laufwerk C und D sind meine internen Festplatten.

G ist die Partition meiner Externen Festplatte, die ich nur 2GB klein gemacht habe und mit fat32 versehen habe, um diese zum booten zu verwenden.

H ist die Partition, wo True Image das Festplatten Image speichern soll. Diese ist auch NTFS.

 

Habe hier 2 externe Festplatten. Eine für jede der beiden internen Festplatten.

 

MfG

Michael

Attachment Size
image.jpg 269.33 KB
0 Users found this helpful

Michael wrote:
 

I have a small problem here.
I have Acronis True Image 2017 Build 8041 running on.
I can also wonderfully create a USB stick as boot media without any problems.
What I wanted to do now: I wanted to use my external USB hard drive, where I also have the backup image on it as a boot medium.
For this I have a 2GB small FAt32 partition created, the rest of the hard disk is an NTFS partition for for backupimage.
The problem: I can not select my boot disk with the FAT32 partition in the "Bootable Rescue Media Builder" to use as a boot medium.
So my question: Can not use Acronis external hard disks for booting?
Or do I have something else to do?
In the appendix I have times a screenshot from the data carrier administration.
C and D drives are my internal hard drives.
G is the partition of my external hard disk, which I made only 2GB small and provided with fat32 to use this to boot.
H is the partition where True Image should store the disk image. This is also NTFS.
Have here 2 external hard disks. One for each of the two internal hard disks.

Acronis Rescue Media Builder will not allow you to select an external HDD to create the media, this is mainly for the purpose of safety as the media creation would wipe the whole HDD contents.

You can do this in a different way.

Make an Acronis backup image of your working bootable USB drive / memory stick.
Restore this backup image to your 2GB FAT32 partition space on the external USB HDD.

Hi Michael,

did you find a solution for this problem? If so, I would like to know how to create a bootable external HDD with the necessary acronis software for recovery.

Maybe you can make it popular here ....

Thank you
HalleMike

Hi HalleMike.

 

I use the way Steve Smith described above.

 

You can do this in a different way.

Make an Acronis backup image of your working bootable USB drive / memory stick.
Restore this backup image to your 2GB FAT32 partition space on the external USB HDD.

 

MfG
MDuss