Skip to main content

error while checking the metadata intergrity of points in time (pits) in the archive acronis (to external seagate hdds archive)

Thread needs solution

I upgraded my 2017  to 2019   today ,but it still does this...(under windows 7 64bit ult)

 

when i back up my d drive, to a 6tb black wdd hdd it works (internal hdd sata 3) , (backups c+ m.2 960 evo) + raid  o
(2x m.2 950 pro) to black hdd and validates ok. (backup up single partitions at a time, c then d etc)

 

but when i back it up (drive d raid 0) to my new usb 3.0 external box (holds 8x Seagate 8TB Archive HDD V2 1NA17Z), any drive,  it fails to validate.

[IMG]http://i63.tinypic.com/ruqmw9.jpg[/IMG]

http://i63.tinypic.com/ruqmw9.jpg

 

(im going to try a sata 3 850 ssd  and the m.2 ssd 960 evo  and see if back to usb 3.0 external box.)

 

help

hdds (all 8)  pass a seagate full long test +  and i can copy files

+ validate files using terracopy from 6tb black to 8tb seageate archive ok

 

a 2nd validate on backup failes too,  but i ran scan hdd for errors on d ddrive and the 8tb

(ran on all hdd) all good

 

 

0 Users found this helpful

when i copy the raid 0 backup on the wd 6tb hdd using terracopy pro  to one of the 8tb seageate archive hdds.

and verify it it, it fails with hashes mismatch

 

[IMG]http://i64.tinypic.com/25p0nio.jpg[/IMG]

http://i64.tinypic.com/25p0nio.jpg

 

i copyied a 562mb . iso  and to same drive ot copyies + passes ok

i copy a 6.98g movie mkv file to same hdd + it fails too

i copy a windows 7 iso 3g file and fails.

then i try a 1.54g mkv file, + FAILES

 

 

MB IS A STRIX Z270G and a 6700k

ram pass ram test no virus etc..

system passes a 15h stress test prime etc..

 

 

external box is new modle (supports 8tb hdd

h82-su3s2 hotway h82 series 8x hdd enclosureon box it says supports 6tb hdd (48tb)

Hotway H82-SU3S2 8-bay USB 3.0 non-RAID Enclosure

but web site says 8x8tb hdds

(pc case gear does  where i got it from over a year ago (not used it yet till now)

 

 

 

 

What file system are you using on this 8 drive raid 0 storage device?  Would you share make, name, and model of the device?

Hi

 

Its ok, i found the problem, it must be a compatibility with usb 3.1 (10gbps) usb port

 

I plug it into the blue  usb 3.0 port (intel)  and it passes all test.

 

Iv plug in the wd portable red passport 2tb hdd in the red usb 10gbps 3.1 port, and it fails now too

 

hotway h82-su3s2

8 bay 3.5 inch hdd enclosure (usb 3.0/e-sata)

http://www.hotway.com.tw/portfolio/portfolio-ajax/h82-su3s2

 

2 x external boxes,  fail on the usb 3.1 10gbps  port (it got a usb a and c port)

its win 7format ntfs etc   gpt

 

I see,

I would look for an updated driver for your 3.1 controller.  It wouldn't increase the speed of your transfers but should clear up the error. :)