Skip to main content

Unable to Authenticate ATI 2019

Thread needs solution

I've been using ATI on this Win 7 (64 bit) PC in various versions for years.  I purchased a 5 computer license and installed it on this I7-4790, 1 TB Samsung EVO850 machine and every time I try to authenticate it, it immediately comes back with "no internet connection".  Without closing that I can open a browser and go to My Account at Acronis, logon, and see all my products.  I also have a Win 10 Pro I7-7820 laptop that it installed on and avtivated without a hitch.  So it's not my router/firewall.  Also on this same Win 7 machine 2018 installed and activated fine.

I have been on the line with support.  They actually took over the machine online, spent around 1 hour trying things and finally ran a packet sniffer and captured logs and snapshots to send to the "development team".

Does anyone know if they have come up with a solution for this problem?

At this point, I have a .tib with the WORKING 2018 version and am about ready to restore back to that to get it working correctly again.

0 Users found this helpful

The normal issues for activation and internet access are caused by using proxy or VPN connections, but could possibly be due to being blocked by a firewall or other security software.

Acronis activation does not work across proxy or VPN connections.

You can use the following KB documents to check your connection status.  KB 47145: Acronis Cloud Connection Verification Tool  and  KB 4350: Acronis Backup to Cloud access ports and hostnames

I'm not using a VPN or proxy.  The software firewall I use is the same on both the computer having the problem, my I7-4790 desktop Win 7 Ultimate (64 bit) and my laptop I7-7829 Win 10 Pro (64 bit), does not have the problem.  Both computers are attached hardwire to the same 1 gig switch which connects to the same Ubiquity router/firewall.

Here is the result from ArocnisCloud US1Check.exe:

Verifying connection to Front End Servers
Performing Name Resolution for: cloud-fes-us1.acronis.com...SUCCESS!
Verifying connection to 62.138.203.226 on port 44445...SUCCESS!
Verifying connection stability to  62.138.203.226 on port 44445...
Connection was verified. Packets Success rate 50/50
Verifying connection to 62.138.203.225 on port 44445...SUCCESS!
Verifying connection stability to  62.138.203.225 on port 44445...
Connection was verified. Packets Success rate 50/50

Verifying connection to Registration Servers
Performing Name Resolution for: cloud-rs-us1.acronis.com...SUCCESS!
Verifying connection to 185.151.160.68 on port 55556...SUCCESS!
Verifying connection stability to  185.151.160.68 on port 55556...
Connection was verified. Packets Success rate 50/50

Verifying connection to RPC Servers
Performing Name Resolution for: web-api-tih.acronis.com...SUCCESS!
Performing Name Resolution for: web-api-vmp.acronis.com...SUCCESS!
Performing Name Resolution for: web-api-tie.acronis.com...SUCCESS!
Verifying connection to 69.20.59.83 on port 443...SUCCESS!
Verifying connection stability to  69.20.59.83 on port 443...
Connection was verified. Packets Success rate 50/50
Verifying connection to 69.20.59.84 on port 443...SUCCESS!
Verifying connection stability to  69.20.59.84 on port 443...
Connection was verified. Packets Success rate 50/50
Please read the above log for results of connection verification. Press any key
to exit

 

I can run the other network check files if you think they will possibly show problems that check did not show.

Try this:

opn the application and click on Account in the left column of the GUI.  Verify that your email address located in the upper right corner of the window is correct.  Click on the carat to the right of your email address to expose a menu.  From that menu select Sign out.  This will trigger a Sign in credentials box.  Enter your account information and sign in to your account. 

Try Authentication again.

When I open the application this is the screen I see:

Application Startup.jpg

If I click sign in I get this (I have entered my password on this screen):

Ready to Sign In.jpg

Then when I click sign in immediately get this:

Failed Internet connection.jpg

It happens so quickly I don't think it actually goes out to the internet.

Looking at your screenshots I would say that your installation is a Trial or is in Trial mode.  I bet if you clicked on the green Buy Full Version button you would be taken to the Cleverbridge site to complete your purchase.  After that you should be able to activate the product.

If you have already purchased the full product I recommend that you send a Private Message to Ekaterina Surkova HERE

Describe your issue and link to this thread in your message.  She can help resolve your problem.

If your problem is as Enchantech suggests - that you have to complete the purchase of the product - then I would recommend that you submit an Acronis Feedback describing this.  ATI's reporting this as a "No Internet connection" problem is quite misleading.  Reporting something such as "No active ATI license found" would be much more helpful.

Actually, I would submit the feedback regardless of the cause.  If you actually have an internet connection then ATI is providing an inaccurate and unhelpful error message.

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 250
Comments: 7092

SlickDriver,

I see active subscriptions registered for your account, so shouldn't be an issue here. Could you check the steps from  https://kb.acronis.com/content/57042 and let us know, if the issue has been resolved with the instructions from the article. 

I went through all the recommendations in the KB.  The Windows Firewall and My AV (Bullguard) Firewall don't appear to be blocking Acronis, no entries found or in the case of Bullguard Acronis is allowed.  The hosts file has no entries for Acronis.  The only thing I found inconsistent is shown in the pings/tracert pasted below.  Please note, though, that I ran AcronisCloudUS1Check.exe from one of the KBs and the results are also depicted below.  As far as my hardware firewall, I doubt that is a problem because I have a Windows 10 Pro laptop that is hardwired to the same switch which goes through the same router/firewall and that machine authenticated without a problem.  I assume that if that machine made it through the router/firewall to authenticate the machine having a problem would make it through also.

The activity below was captured from a command prompt running in Administrative mode.  Acronis authentication is also being tried from an Administrative account.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Windows\system32>ping activation.acronis.com

Pinging activation.acronis.com [69.20.59.102] with 32 bytes of data:
Reply from 69.20.59.102: bytes=32 time=75ms TTL=252
Reply from 69.20.59.102: bytes=32 time=74ms TTL=252
Reply from 69.20.59.102: bytes=32 time=77ms TTL=252
Reply from 69.20.59.102: bytes=32 time=76ms TTL=252

Ping statistics for 69.20.59.102:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 74ms, Maximum = 77ms, Average = 75ms

C:\Windows\system32>ping web-api-tih.aconis.com

Pinging web-api-tih.aconis.com [92.242.140.2] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 92.242.140.2:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Windows\system32>ping web-api-tie.acronis.com

Pinging web-api-tie.acronis.com [69.20.59.84] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 69.20.59.84:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Windows\system32>ping web-api-vmp.acronis.com

Pinging web-api-vmp.acronis.com [69.20.59.83] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 69.20.59.83:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\Windows\system32>
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Windows\system32>tracert web-api-tih.aconis.com

Tracing route to web-api-tih.aconis.com [92.242.140.2]
over a maximum of 30 hops:

  1    <1 ms    <1 ms    <1 ms  192.168.0.1
  2     7 ms     6 ms     7 ms  10.71.56.1
  3     8 ms     8 ms     8 ms  100.120.104.90
  4    12 ms     9 ms    14 ms  100.120.104.26
  5     8 ms     8 ms    10 ms  68.1.1.61
  6     7 ms    13 ms     8 ms  64.38.110.245
  7    17 ms    17 ms    17 ms  64.127.128.200
  8    39 ms    40 ms    40 ms  dal-t2-4-phx-t1-1.bboi.net [64.127.128.178]
  9    79 ms    79 ms    79 ms  66.216.2.14
 10    85 ms    85 ms    85 ms  66.216.2.13
 11    85 ms    83 ms    85 ms  66.216.1.27
 12     *        *        *     Request timed out.
 13     *        *        *     Request timed out.
 14     *        *        *     Request timed out.
 15     *        *        *     Request timed out.
 16     *        *        *     Request timed out.
 17     *        *        *     Request timed out.
 18     *        *        *     Request timed out.
 19     *        *        *     Request timed out.
 20     *        *        *     Request timed out.
 21     *        *        *     Request timed out.
 22     *        *        *     Request timed out.
 23     *        *        *     Request timed out.
 24     *        *        *     Request timed out.
 25     *        *        *     Request timed out.
 26     *        *        *     Request timed out.
 27     *        *        *     Request timed out.
 28     *        *        *     Request timed out.
 29     *        *        *     Request timed out.
 30     *        *        *     Request timed out.

Trace complete.

C:\Windows\system32>
Verifying connection to Front End Servers
Performing Name Resolution for: cloud-fes-us1.acronis.com...SUCCESS!
Verifying connection to 62.138.203.225 on port 44445...SUCCESS!
Verifying connection stability to  62.138.203.225 on port 44445...
Connection was verified. Packets Success rate 50/50
Verifying connection to 62.138.203.226 on port 44445...SUCCESS!
Verifying connection stability to  62.138.203.226 on port 44445...
Connection was verified. Packets Success rate 50/50

Verifying connection to Registration Servers
Performing Name Resolution for: cloud-rs-us1.acronis.com...SUCCESS!
Verifying connection to 185.151.160.68 on port 55556...SUCCESS!
Verifying connection stability to  185.151.160.68 on port 55556...
Connection was verified. Packets Success rate 50/50

Verifying connection to RPC Servers
Performing Name Resolution for: web-api-tih.acronis.com...SUCCESS!
Performing Name Resolution for: web-api-vmp.acronis.com...SUCCESS!
Performing Name Resolution for: web-api-tie.acronis.com...SUCCESS!
Verifying connection to 69.20.59.83 on port 443...SUCCESS!
Verifying connection stability to  69.20.59.83 on port 443...
Connection was verified. Packets Success rate 50/50
Verifying connection to 69.20.59.84 on port 443...SUCCESS!
Verifying connection stability to  69.20.59.84 on port 443...
Connection was verified. Packets Success rate 50/50
Please read the above log for results of connection verification. Press any key
to exit

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 250
Comments: 7092

Thank you for checking the suggested troubleshooting steps! As the known solutions didn't help, I'd suggest opening a support ticket for investigation (go to https://www.acronis.com/support/contact-us/ and click on Technical assistance, log in to your Acronis account if prompted) Please share the results of investigation with the community.