Skip to main content

cloning laptop drive

Thread needs solution

high everyone im trying to clone the drive in my wind 10 laptop to another drive i have acronis 2021. when it gets to step 6 out of seven i get this error message

Attachment Size
clone - Copy.jpg 2.99 MB
0 Users found this helpful

Ron, welcome to these public User Forums.

The error sector from your source drive for the clone may be in one of the hidden / system partitions that do not have a drive letter assigned and cannot therefore be checked by running the CHKDSK command.

In my experience, these bad sector errors are genuine and therefore you need to check the whole drive.

Dedicated diagnostic utilities from the disk manufacturers take the longest time to complete the checks, but provide the most accurate methods of checking whether the disk is good or needs replacement:

 - Western Digital drives: Western Digital Dashboard

 - Seagate disks: SeaTools for Windows

 - HGST disks: HGST Windows Drive Fitness Test (WinDFT)

 - Intel SSDs: Intel Memory and Storage Tool (GUI)

 - Samsung drives: Samsung Magician

 - ADATA drives: ADATA SSD ToolBox

 - Kingston SSDs: Kingston SSD Toolbox, Kingston SSD Manager

 - Transcend SSDs: Transcend SSD Scope

 - Silicon Power disks: SP ToolBox

 - Toshiba disks: Toshiba PC Diagnostic Tool Utility

 - Crucial disks: Crucial Storage Executive

 - SanDisk disks: SanDisk SSD Dashboard tool / SanDisk SSD Dashboard user guide

Note: it is strongly recommended to make a full disk backup of any source drive before doing a clone of it - this is your safety net in case of any errors occurring etc.

Please see KB 56634: Acronis True Image: how to clone a disk - and review the step by step guide given there.

Note: the first section of the above KB document directs laptop users to KB 2931: How to clone a laptop hard drive - and has the following paragraph:

It is recommended to put the new drive in the laptop first, and connect the old drive via USB. Otherwise you will may not be able to boot from the new cloned drive, as Acronis True Image will apply a bootability fix to the new disk and adjust the boot settings of the target drive to boot from USB. If the new disk is inside the laptop, the boot settings will be automatically adjusted to boot from internal disk. As such, hard disk bays cannot be used for target disks. For example, if you have a target hard disk (i.e. the new disk to which you clone, and from which you intend to boot the machine) in a bay, and not physically inside the laptop, the target hard disk will be unbootable after the cloning.