Skip to main content

VM - USB Stick boot - Recovery

Thread needs solution

Hey,

mal eine Frage habe ich mir jetzt mit Acronis True Image 2020 ein Backup erstellt (zum testen)
Boot Medium auf den USB Stick erstellt.
Jetzt wollte ich das Backup auch testen, jedoch ist es mit VirtualMachine nicht möglich vom USB Stick zu booten? :/

Danke & Gruß

0 Users found this helpful

What are you using for virtualization? 

In VMWare, you have to start the VM first... this will then allow you to assign the physical USB drive to the VM (outside of the active VM, but in the task panel below it). 

Once assigned to the VM, you can then select it as a bootable option.  If you're using another virtual product, you may have to do something similar.

-----------------

Was verwenden Sie für die Virtualisierung?

In VMWare müssen Sie zuerst die VM starten. Anschließend können Sie der VM das physische USB-Laufwerk zuweisen (außerhalb der aktiven VM, jedoch im darunter liegenden Task-Bereich).

Sobald die VM zugewiesen wurde, können Sie sie als bootfähige Option auswählen. Wenn Sie ein anderes virtuelles Produkt verwenden, müssen Sie möglicherweise etwas Ähnliches tun.

Attachment Size
510324-171557.jpg 116.37 KB
510324-171559.jpg 105.48 KB

Also, why not just create an .iso and mount the .iso?  That is probably easier for VM booting.

----------------------

Warum nicht einfach ein .iso erstellen und das .iso mounten? Das ist wahrscheinlich einfacher für das Booten von VMs.

The alternative here is to set your VM CD drive to use an ISO image file of your USB boot media then boot from the CD.

Hallo,

 

danke für eure schnellen Antworten.

Das Problem ist ich kann in der VM 6 nicht vom USB Stick booten :/

Attachment Size
510459-171595.jpg 105.74 KB

Which program are you using? .iso is probably going to be easiest since it is a virtual DVD.

ich benutze Oracle Virtual Box 6.0

Möchte eben nur einmal mein Backup testen ob alles funktioniert (habe noch die 30 Tage Test Version)

Please see the Oracle VirtualBox User Guide where it says the following:

1.9.1. Starting a New VM for the First Time

When a VM is started for the first time, the First Start Wizard, is displayed. This wizard helps you to select an installation medium. Since the VM is created empty, it would otherwise behave just like a real computer with no OS installed. It will do nothing and display an error message that no bootable OS was found.

For this reason, the wizard helps you to select a medium to install an OS from.

  • If you have physical CD or DVD media from which you want to install your guest OS, such as a Windows installation CD or DVD, put the media into your host's CD or DVD drive.

    In the wizard's drop-down list of installation media, select Host Drive with the correct drive letter. In the case of a Linux host, choose a device file. This will allow your VM to access the media in your host drive, and you can proceed to install from there.

  • If you have downloaded installation media from the Internet in the form of an ISO image file such as with a Linux distribution, you would normally burn this file to an empty CD or DVD and proceed as described above. With Oracle VM VirtualBox however, you can skip this step and mount the ISO file directly. Oracle VM VirtualBox will then present this file as a CD or DVD-ROM drive to the virtual machine, much like it does with virtual hard disk images.

    In this case, the wizard's drop-down list contains a list of installation media that were previously used with Oracle VM VirtualBox.

    If your medium is not in the list, especially if you are using Oracle VM VirtualBox for the first time, click the small folder icon next to the drop-down list to display a standard file dialog. Here you can pick an image file on your host disks.

After completing the choices in the wizard, you will be able to install your OS.

1.9.1. Erstmaliges Starten einer neuen VM

Wenn eine VM zum ersten Mal gestartet wird, wird der First Start Wizard angezeigt. Dieser Assistent hilft Ihnen bei der Auswahl eines Installationsmediums. Da die VM leer erstellt wird, verhält sie sich ansonsten wie ein echter Computer ohne installiertes Betriebssystem. Es wird nichts tun und eine Fehlermeldung anzeigen, dass kein bootfähiges Betriebssystem gefunden wurde.

Aus diesem Grund hilft Ihnen der Assistent bei der Auswahl eines Mediums, von dem aus Sie ein Betriebssystem installieren möchten.

    Wenn Sie über physische CD- oder DVD-Medien verfügen, von denen Sie Ihr Gastbetriebssystem installieren möchten, z. B. eine Windows-Installations-CD oder -DVD, legen Sie die Medien in das CD- oder DVD-Laufwerk Ihres Hosts ein.

    Wählen Sie in der Dropdown-Liste der Installationsmedien des Assistenten Host-Laufwerk mit dem richtigen Laufwerksbuchstaben aus. Wählen Sie bei einem Linux-Host eine Gerätedatei aus. Auf diese Weise kann Ihre VM auf die Medien in Ihrem Host-Laufwerk zugreifen, und Sie können von dort aus mit der Installation fortfahren.

    Wenn Sie Installationsmedien in Form einer ISO-Image-Datei wie bei einer Linux-Distribution aus dem Internet heruntergeladen haben, würden Sie diese Datei normalerweise auf eine leere CD oder DVD brennen und wie oben beschrieben vorgehen. Mit Oracle VM VirtualBox können Sie diesen Schritt jedoch überspringen und die ISO-Datei direkt bereitstellen. Oracle VM VirtualBox präsentiert diese Datei dann als CD- oder DVD-ROM-Laufwerk für die virtuelle Maschine, ähnlich wie bei Images virtueller Festplatten.

    In diesem Fall enthält die Dropdown-Liste des Assistenten eine Liste der Installationsmedien, die zuvor mit Oracle VM VirtualBox verwendet wurden.

    Wenn sich Ihr Medium nicht in der Liste befindet, insbesondere wenn Sie Oracle VM VirtualBox zum ersten Mal verwenden, klicken Sie auf das kleine Ordnersymbol neben der Dropdown-Liste, um ein Standarddialogfeld für Dateien anzuzeigen. Hier können Sie eine Image-Datei auf Ihren Host-Festplatten auswählen.

Nachdem Sie die Auswahl im Assistenten getroffen haben, können Sie Ihr Betriebssystem installieren.

 

Danke

 

aber irgendwie bekomme ich dies nicht hin ;( :(

Gibt es irgendwo eine Anleitung wie man ein Backup macht und dies auf einer Virtuellen Maschine testen kann?

No, not in True Image.  It can be done and does work, but you need to know how to configure your VM software to accept an .iso, a USB drive or a physical CD/DVD.  You would need to know the same information to install a VM from scratch too.  It really depends on the virtualization software you use at each software is a bit different though.

Once you get that down, you should be able to restore a backup image to a virtual hard drive the same way you would to a physical hard drive.