True image server boot cd seeing raid 0 stripe as two seperate drives

Thread needs solution
truwrikodrorowrelupicugojestutroclulachosaswunuhospikigawakijosaswenomaruclojeueclikaspedrubewidebrisubrohutrurifruuagothunugekedrumucisiuobrobrecrupeslapuswosluprothethibakaslechurathikucli
Beginner
Posts: 3
Comments: 1

Hi guys as the title says

When I use a True image server boot cd to try and restore a system partition to a new raid 0 array I've created for some reason acronis sees two seperate drives rather than a raid stripe that I've created.

The raid 0 array is two corsair 60GB SSD's would this cause the issue?
Thanks

R.

Tue, 09/21/2010 - 10:33
0 Users found this helpful
truwrikodrorowrelupicugojestutroclulachosaswunuhospikigawakijosaswenomaruclojeueclikaspedrubewidebrisubrohutrurifruuagothunugekedrumucisiuobrobrecrupeslapuswosluprothethibakaslechurathikucli
Beginner
Posts: 3
Comments: 1
rikki fulton wrote:

Hi guys as the title says

When I use a True image server boot cd to try and restore a system partition to a new raid 0 array I've created for some reason acronis sees two seperate drives rather than a raid stripe that I've created.

The raid 0 array is two corsair 60GB SSD's would this cause the issue?
Thanks

R.

Good news, fixed the issue by deleting the array and recreated it, I then used disk director trial to create a new disk and was able to restore the image.

Thanks for all the help ;o)

Thu, 09/23/2010 - 08:15