Skip to main content

Backup to external USB Device does not work

Thread needs solution

I installed Acronis TIH 2011 and created 2 Jobs. Monday to Friday excluding Thursday I create a backup to a Network Storage. Every Thursday to an external USB Disk that are changed every friday.

Strangely the Jobs are set up exactly the same, but the Backup to the Disk suddenly fails:

1 Information 27.01.2012 04:00:04 Volume-
Backup (SystemC) (DatenD) gestartet
2 Information 27.01.2012 04:00:04 Analysiere Partition '0-0'...
3
Information 27.01.2012 04:00:05 Analysiere Partition 'C:'...
4 Information 27.01.2012 04:00:06
Analysiere Partition 'D:'...
5 Information 27.01.2012 04:00:06 Analysiere Partition '0-0'...
6
Information 27.01.2012 04:00:07 Analysiere Partition 'F:'...
7 Information 27.01.2012 04:00:18 Erstelle
vollständiges Backup Von: System (C:), Daten (D:) In Datei: "F:\Meine Backups\Volume-Backup_SystemC_DatenD11.tib"
Komprimierung: Normal
8 Information 27.01.2012 04:00:18 Austehende Aktion 147 hat begonnen: 'Volume-Image
erstellen'.
9 Information 27.01.2012 04:00:18 Partition C: sperren...
10 Fehler 27.01.2012 06:45:19
Die Aktion kann im stillen Modus nicht ausgeführt werden. (0x103F1)
Tag = 0x1D8EAB676A3F69EA
Die spezifizierte
Datei existiert nicht. (0x40011)
Tag = 0x1D8EAB676A3F69EB
11 Information 27.01.2012 06:45:19 Abgebrochen.

12 Fehler 27.01.2012 06:45:19 Die Aktion kann im stillen Modus nicht ausgeführt werden. (0x103F1)
Tag =
0x1D8EAB676A3F69EA
Abgebrochen. (0x4000F)
Tag = 0x1D8EAB676A3F69EB
13 Information 27.01.2012 06:45:20 Die
spezifizierte Datei existiert nicht.
function="OpenFileW"
filename="\\?\F:\Meine Backups\Volume-
Backup_SystemC_DatenD111.tib.metadata"
15 Fehler 27.01.2012 06:55:20 Abgebrochen.
16 Fehler 27.01.2012
06:55:20 Aktion mit Fehlern beendet.

Basically it says that the File doesn't exist? But why? I create a FULL Archive every evening, so this should not depend on any old archive at all?

0 Users found this helpful

If you rotate your USB disks, assign a different drive letter for each one, and create a different backup task for each one. Of course, if you have many different USB disks, this protocol is not practical...

Could I fix this with another version? I never had this problem with the Backup And Recovery on the servers, and I'm using the same method (one job, different disks). So could I fix this with maybe the workstation edition?