Can't choose any destination ATI 2011 Build 5519
Can't choose any destination ATO 2011 Build 5519
Attachment | Size |
---|---|
no_destination_edit_1.jpg | 107.42 KB |

- Log in to post comments


When you click on the arrowhead shown as #1, does it open to display your My computuer icon? or what is displayed?
Click image to enlarge viewing.
- Log in to post comments

Nothing happens when I click on "arrowhead shown as #1."
- Log in to post comments

I don't have a specific answer for your issue but a couple things you could try.
1. Reopen your downloaded install file for your currect installed build and start the install again and you can then choose the repair option.
2. If that does not work, then contact support and fill out a support request advising of your issue of disk not recogniized. You will need your serial number to create your request.
- Log in to post comments

I uninstalled ATI 2011 Build 5519, then reinstalled, now it works. Buggy software?
- Log in to post comments

Hello all,
Thank you for your messages.
Grover, I really appreciate your help.
DTM, I will definitely assist you with this.
Our program uses a component called SnapApi which is in charge of disk operations and disk detection. Most likely the first time you installed the software for some reason the SnapApi components failed to update properly and were malfunctioning. When you re-installed the program the issue was corrected.
Please let me know if you have additional questions or any other problems.
Thank you.
- Log in to post comments

I have same issue. I back up my documents on the networks share at home. I have notbook.
On my job this networks share isn't available. And when i open new backup on my job, i can't select destination. Like image in the first message.
I installed new version 6597 today, but it isn't resolved my issue.
- Log in to post comments

Hello Andrei,
Thank you for posting and welcome to the forum. I will do my best to assist you with this issue.
Let us start with the network share problem. Please check this article as a reference to make sure you are doing all the proper steps.
After that, I would like to ask you for screenshots of the network share how it is visible in Windows and then in Acronis True Image 2011 Home. You can send them to me through a private message.
The second issue can occur as I posted above, because the drivers did not update properly. Can you run the installation file and select repair installation? If you continue to have this problem, please send me a private message with the AcronisInfo report.
Looking forward to your reply and if you have additional questions please let me know.
Thank you.
- Log in to post comments

Anton wrote:Let us start with the network share problem. Please check this article as a reference to make sure you are doing all the proper steps.
I do all like in this instruction.
Anton wrote:After that, I would like to ask you for screenshots of the network share how it is visible in Windows and then in Acronis True Image 2011 Home. You can send them to me through a private message.
My screenshot like image in the first message. I can't select destination.
And when i open console at my work, console is opening long time, i think becase it looking for networks share.
Anton wrote:The second issue can occur as I posted above, because the drivers did not update properly. Can you run the installation file and select repair installation? If you continue to have this problem, please send me a private message with the AcronisInfo report.
Looking forward to your reply and if you have additional questions please let me know.
Thank you.
I tried do it on my last version, reinstall resolved my issue. But after installed new version i have same issue.
I can back up discs at home, when my networks share ia available, but i can't do it at my work.
Attachment | Size |
---|---|
50717-92917.png | 228.62 KB |
- Log in to post comments

I am having the same issue on latest version (updated Dec. 20th). Acronis sees the backup destination drives, except that I cannot choose a destination drive. I click the drop-down arrow, and nothing happens.
This has happened since I bought the 2011 version. Sometimes it works, other times not. I cannot figure out why it works sometimes. Rebooting, shutting off external drive, etc. does not reliably fix issue. Nor does uninstalling and reinstalling (I had issue on a previous clean build).
All drivers on the system are up to date.
Here is a screenshot attached of the screen I see (the drive called F: 'backup' is the drive I would like to select as the destination drive). WDBlack and Backups are on different controllers in the system (WDBlack is on the Intel ICHR10 controller, and the Backups drive is on a Jmicron controller, on Asus Rampage III Formula). Had the exact same issue on my Asus P6T.
Attachment | Size |
---|---|
51750-93082.png | 87.25 KB |
- Log in to post comments

Hello all,
Thank you for your comments.
I would like to help you with resolving this issue. Would you mind downloading the latest version of the SnapApi drivers, 586 and see if the issue persists?
If it does, I would really appreciate if you could provide me with the following logs:
1. AcronisInfo report.
2. SnapApi logs. (please send me a private message so that I can send you the instructions, they require additional unique links to be generated)
Please let me know if you have additional questions.
Thank you.
- Log in to post comments

The latest version of the SnapApi didn't resolve this inssue.
- Log in to post comments

Attachment | Size |
---|---|
52850-93334.png | 53.09 KB |
- Log in to post comments

The snapapi drivers have not been able to fix this for me either. Right now I am running my system unprotected.
- Log in to post comments

Christopher,
Don't go unprotected. Boot from the Rescue CD and perform a disk option backup when booted from the CD.
When booted from the TI user created Rescue CD, this info can help.
http://forum.acronis.com/forum/17505#comment-52840
Does the prior post by Edo provide any temp solution. What shoud be happening is that there should be a default location appearing in the windows and by clicking on the arrowhead to the right, a window should open for you to choose the drive and folder where you want the backup to be stored.
Have you tried disconnecting any usb devices; or powering up a usb printer? If using a external drive for your backup, consider assigning a constant drive letter such as x or y or z.
Have you tried doing a repair of your install? Restart the downloaded install program and choose install. Within a few seconds, a window will open providing the repair option.
- Log in to post comments

Hi Grover. Thanks for the suggestions.
- Edos issue does not appear to be the same as me. No network or disconnected drives.
- clicking on the arrowhead on the right of the drop down box lists no drives to back up to. Strangely, Acronis sees the drive I want to use (and gives me the option to back it up, as shown in a previous screenshot I provided) but will not allow me to select it as a destination drive, even though I ensure the drive is unselected as a backup source.
- I have not tried the bootable CD yet.
I have created log files and sent them via PM to Anton.
- Log in to post comments

Your symptons sounds a lot like this posting.
http://forum.acronis.com/forum/17609#comment-52973
Simulate creating a new task which is a "files & folders" backup rather than a partition backup.
Is the missing drives listed either as a source or destination?
I believe there may be ways of creating or renewing an "MBR" without destroying the data on the disk.
- Log in to post comments

When I use the File Backup method I do not see the drive.
I have tested two other backup solutions (including Windows backup) this afternoon and both see the destination drive perfectly (although I did not try to do a backup, I just wanted to verify if the drives appeared available).
edit: The Acronis boot media DO see the drives properly, and can access them
- Log in to post comments