Migrate from 750GB HDD to Samsung 840 EVO 750GB SSD
I am getting ready to replace my existing 750GB HDD with a new Samsung 840 EVO 750GB SSD. I am running Windows 7 64 bit. In reading thru the documentation of the Samsung migration utility it clearly states that it does not migrate the recovery partition(s). Because of that I would like to use ATI 2014 to do the migration instead.
After reading thru as many similar posts as possible concerning this topic I am still not clear as to the right way to accomplish this. Here is what I think I should do:
Install the new SSD in one of my empty drive bays.
Reboot with the ATI 2014 recovery CD.
Clone the existing HDD to the SSD.
Remove the HDD and reboot.
Everything should now be running off of the new SSD.
Run the Samsung Magician SW to optimize the SSD performance.
Is that correct? Am I missing something? Is this the recommended procedure or should I be doing this another way? I do already have a complete system image backed up to my NAS drive. Should I use restore from that system image instead?
Thanks for any and all help!
- Log in to post comments
For anyone migrating from a HDD to an SSD, I just used the following very simple process and it worked perfectly using ATI 2014. I think the key is that the SSD you are migrating to needs to be the same size as the original HDD that you are migrating from. Here is the process:
Make sure that you have already created a working ATI recovery disk.
Power down your system.
Remove the original HDD and install it in an empty drive bay just like you are adding a new HDD.
Install the new SSD in the location your HDD was in using the same connectors that were on the original HDD.
Reboot with the ATI 2014 recovery CD.
Select Tools & Utilities and select Clone Disk.
Select Automatic mode.
Select your original HDD as the source and your new SSD as the target.
You don't need to make any other changes or selections.
Once the cloning process is complete remove the boot disk, power down the system, remove the HDD and reboot.
Everything should now be running off of the new SSD.
Yes it really is that simple. Everything on the new SSD should be the same as on the original HDD including any hidden partitions.
- Log in to post comments
A note here to say that you should verify that your SSD is aligned, in particular after a clone operation. ATI is smart enough to automatically align the disk, but it is better to verify afterwards.
In case you don't trust the automation, or if your SSD has a different size, the recommended approach, including SSD tweaks are here:
http://forum.acronis.com/forum/38522#comment-120956
- Log in to post comments
I verified the alignment soon after I booted to the cloned SSD. Honestly, all the posts that I had read, including the one that you referenced, had me very worried that the clone operation wouldn't work correctly, particularly selecting the "Automatic" mode. As I said, as long as the SSD and the HDD are the same size it works perfectly. At least in my case there was no reason to hurt my head and manually adjust all the parameters. Not sure why the hesitancy to let Automatic clone do what it apparently was designed to do.
- Log in to post comments