Skip to main content

TI 2013 problems with UEFI-mainboard using Emergency-CD and network-connections

Thread needs solution

TI 2013 and Networkdevices / NAS:

1. SYSTEM in use:
MB: GA-H77-D3H (UEFI)
System Disk: SAMSUNG SSD: 100MB EFI-Systempartition. 120GB NTFS Startpartition
+ some USR-DISKs
OS: Win7 Ult. 64
TI-2013 PP installed

2. Make Image from Windows: every Networkdevice / NAS is reachable: works !

3. Emergency-CD:
MB-BOOT menu has 2 choices:
Boot with UEFI-Loader => ... ACRONIS UEEFI LOADER ... and so on ...
or
Boot conventionell => ... ACRONIS LOADER ... and so on ...

Result in both cases: network is NOT browsable !!!

Direct entry like \\NASxyz\public\xx.tib shows login-window for usr/pwd, but this doesn't work, login failes
=> network is NOT accessable / browsable !!!

4. SAME Emergency-CD with a different computer (NO UEFI)
booting ... ACRONIS LOADER ...
everything works perfect: browsing network, ALL Networkdevices are visible, login works
=> perfect, like it should be !!!

In case of real problems using the Emergency-CD is the only option left, WHAT now ?

Those UEFI-boards are not that new, WHERE is the solution ???

Does somebody have an idea / solution ?

0 Users found this helpful

It looks like the network adapter is not recognized on computer A.
since you have the Plus Pack, you can create a WinPE-based recovery CD. You will be able to use a command prompt to ping tehe server and see if you have connection, and then you will have to use "net use" to set up the connection.