Skip to main content

TI 2015 and Crucial MX200 SSD

Thread needs solution

Hello everyone!

After upgrading hardware problems started with TI 2015 - a few minutes after Windows boot up system freezes. Yes, I have a Crucial MX200 SSD. I read a lot about problems with TI 2015 and Crucial SSDs on this forum and Crucial's forum. I updated the SSD's firmware to the latest available (MU02) and install latest Intel Rapid Storage Technology driver from motherboard manufacturer. But it didn't help :-(

Before hardware upgrade I had a Kingston V300 SSD and TI 2015 worked without any problems.

My current configuration is Intel i7 4790S processor, Gigabyte GA-Z97X-UD3H-BK motherboard, 16 GB RAM, Crucial MX200 SSD and two other HDDs. The system is Windows 8.1 Professional.

So, Acronis please solve this problem :-(

Sincerely
Robert

0 Users found this helpful

I found out after a lot of trouble shooting with my system , I had to
delete Irst and use just basic windows controller software and haven't had
any problems since with crucial and freezes.
try deleting irst and just using windows software... does it work ?
maybe try different irst version dates...
let us know ......
joe

Previously I had only basic Windows driver - unfortunately the TI also froze the system. I installed IRST because I thought it would help :-(

Robert

Off point, but fortunately not all Crucial SSDs have this problem. I have an M550 and have had no issues (however first intsall was on another SSD and that SSD was then cloned to the M550). I have since updated ATI build and had no problems.

Ian