True Image Home 2009 Netzwerkzugriff
Ich habe True Image Home 2009 auf einem Rechner mit Windows XP Home SP3 installiert, seitdem ist kein Zugriff mehr auf Freigaben möglich, die auf diesem Rechner existieren. Es kommt die Meldung "Für diesen Befehl ist nicht genug Serverspeicher verfügbar". Änderungen des Parameters IRPStackSize in der registry brachte keinen Erfolg. Erst nach Deinstallation von TrueImage war ein Netzzugriff wieder möglich. Weiß jemand eine Lösung? Danke

- Log in to post comments

Hallo -- das o.g. Verhalten tritt bei mir ebenfalls auf-- 3 XP ( SP 3 ) Rechner können sich "nicht mehr unterhalten" -- Freigaben ok, IPRStackSize ok,
Gibt es neue Erkenntnisse zu dem Thema ? Wäre natürlich an einer Info sehr interessiert
- Log in to post comments

Hello Norbert,
Thank you for using Acronis Products
Increase IRPStackSize value up to 50 and see if the issue persists.
The problem is that Microsoft Lanman Server has a fixed limit on the quantity of filters it supports. Since Acronis product installs some filters to work, the total number of filters can exceed the server's limit. The same problem may occur after installation of an Antivirus product and is described in the Microsoft Knowledge Base Article 177078.
Please refer to the Microsoft Knowledge Base Article 177078 for a workaround (also applies to Windows Vista and Windows Server 2008).
If you create the IRPStackSize value as described in Step 4 in the Microft article, the default value will be 15. It is recommended that you increase the value by 3.
Then reboot and see if it works. If it does not, increase the value by 3 again (to 21, for example) and reboot again. If you get to 50 and it still does not work, the issue is most likely not caused by the IRPStackSize value.
It's preferable to write in English as most members are English speaking.
- Log in to post comments

I have the same problem: True Image 2009 and 2010 as well are blocking network access from other computers.
I am using XP Prof. SP3 on all computers.
Besides several user-programs I have avira and spybot installed.
IRPstacksize was increased in several steps up to 50, that does not help.
It is easy to locate TI 2009 and 2010 as the source of the problem: There is no network access with one of them installed and there is with none or with True Image 11.
That makes me think that there might be some difference beetwen the versions concerning this issue.
There is no other problem whatsoever with any of my 5 PCs.
Any ideas?
Best regards
Rainer
- Log in to post comments

I get the same problem with Acronis Home 2010 on several Pc´s.
The suggestion "IRPstacksize up to 18 (50)" isn´t working.
All Pc´s have XP Prof, SP3. The Error after i installed Acronis True Image Home 2010 was always " nicht genügend Serverspeicher (not enough server memory)
Any other ideas or workarounds?
- Log in to post comments

I have also the same problem. The aswer from dmitry (acronis) makes a lot of work, but it seems not to solve the problem.
I think, it's a shame for acronis
There is no possibility to to give it back and to get back money for a program, that doesn't work.
- Log in to post comments

Auch ich hatte das Problem mit der Fehlermeldung: nicht genug Serverspeicher beim Erstellen von Netzlaufwerkverbindungen. (Die IRPStackSIze Geschichte habe ich schon durch! Wer 50 brachte auch nichts).Ursache ist defenitiv Acronis2010 (v6053). Acronis 2009 hatte dieses Problem nicht. Acronis2010 deinstalliert und meine Netzlaufwerkverbindugen funktionierten wieder. Mehrmals wurde das Acronis Support Team mit ins Boot genommen.
Fazit: habe den Wert auf 80 erhöht und dann klappte es
- Log in to post comments

Das Problem mit den nicht zu öffnenden Ordnern im Heimnetzwerk trat bei mir unter XP SP3 nur dann auf, wenn gleichzeitig True Image und ein Virenscanner GDATA oder Antivir installiert waren.
True Image ohne Virenscanner blockiert nicht das Netzwerk. Dann habe ich den Virenscanner AVG (freeware) installiert, da gibt es keine Probleme zusammen mit True Image.
- Log in to post comments

Using ATI Home 2009, build 9796, Vista Ultimate SP2, 32 bit.
The following URLs may help.
http://forum.acronis.com/forum/3124
http://forum.acronis.com/forum/3032
http://wilderssecurity.com/showthread.php?t=249919
http://wilderssecurity.com/showthread.php?p=1533909
- Log in to post comments

Hello,
I have the same issue to access shared folders from other computers. I increased the value of the IPRStackSize to 32H (50) as recommended by Microsoft, but the issue still exists. After uninstalling ATI 2009 all worked fine. I tried to install directly the lastest version (build 9809) but got twice a blue screen (IRQ_NOT_LESS_OR_EQUAL). Then I installed build 9769 and updated to 9809, but the same issue again, I can not access the shared folders.
Does anybody have any ideas?
Kind regards
Jens
- Log in to post comments

At the moment there's no other workaround as the one described above!
In many cases the problem occurs in conjunction with other programs (like antivirus programs). Increasing the IRP stack size
only does not help here (the limit is already reached). In this case uninstallation of one of these programs is the only way.
In my case I had the choice to uninstall TI or Avira... After I uninstalled Avira it works well (with a IRP of 18)...
- Log in to post comments

Ich habe True Image Home 2010 auf einem Rechner mit Windows XP Pro SP3 installiert, seitdem ist kein Zugriff mehr auf Freigaben möglich, die auf diesem Rechner existieren. Es kommt die Meldung "Für diesen Befehl ist nicht genug Serverspeicher verfügbar". Erst nach Deinstallation von TrueImage war ein Netzzugriff wieder möglich. Weiß jemand eine Lösung? Danke
- Log in to post comments

Nasser Sanati wrote:Ich habe True Image Home 2010 auf einem Rechner mit Windows XP Pro SP3 installiert, seitdem ist kein Zugriff mehr auf Freigaben möglich, die auf diesem Rechner existieren. Es kommt die Meldung "Für diesen Befehl ist nicht genug Serverspeicher verfügbar". Erst nach Deinstallation von TrueImage war ein Netzzugriff wieder möglich. Weiß jemand eine Lösung? Danke
- Log in to post comments

Darum genau gehts doch in diesem Thread!
Also bitte mal von oben lesen...(IRPStackSize erhöhen...)
- Log in to post comments

Warum soll die IRPStackSize nur schrittweise um 4 erhöht werden? Warum nicht gleich auf 50 setzen? Was hat das für Nachteile?
- Log in to post comments

...kannste gleich auf 50 (32 hex) setzen - habe ich auch so gemacht. Es werden halt ein paar mehr Ressourcen (RAM) verwendet. Ist aber bei heutigen Speicherbestückungen kein Thema...
Übrigens: bei mir hat es (seltsamerweise) geholfen, zuerst den StackSize zu erhöhen und dann Arcronis zu installieren...
- Log in to post comments
