Skip to main content

Unterstützt Acronis vmProtect 9 Wechseldatenträger

Thread needs solution

Unterstützt Acronis vmProtect 9 Wechseldatenträger? Denn Acronis vmProtect 8 unterstützt laut Forum ja keine Wechseldatenträger

0 Users found this helpful
frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 22
Comments: 3800

Hi Michael,

The bootable media can be created with the Media Builder component which is downloaded separately from your account management. It's basically the same behavior as it was in 8th version. This media can be used for P2V migration + for recovery of ESXi host configuration. Can you please clarify what kind of problems you have with it? It's not completely clear from your original post.

Thank you.
--
Best regards,
Vasily
Acronis vmProtect Program Manager

Ich wollte eigentlich nur wissen ob die Aussage aus Nr 39454 auch für VMProtect 9 gilt.

Zitat aus Fal von Peter Vigoureux:
Hallo Bernd Prösdorf,

vielen Dank für die ausführliche Schilderung des Problems. Gerne helfe ich bei der Lösung.

Obwohl Sie die Anbindung über eine Freigabe organisiert haben, werden Sie regelmäßig auf folgende Probleme stossen:

Acronis vmProtect 8 unterstützt keine Wechseldatenträger. Sie werden also sehr häufig Fehlermeldungen im Log finden, auch wenn die eigentliche Sicherung laufen wird. Sehen Sie dazu diese Seite in unserem Benutzerhandbuch.

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 22
Comments: 3800

Hi Michael,

That thread was describing a specific case where backup TO removable media was used. While direct backup to removable media (such as CD-rom, or RDX) is not supported - it is still possible to utilize such storages by accessing them over network (as shared resource from another computer). There is also no yet possibility to back up to a USB drive connected directly to ESXi host - such USB drive must be connected to another machine and accessed over network (for example \\server\share\) .

Thank you.
--
Best regards,
Vasily
Acronis vmProtect Program Manager

VMProtect 9 wird nicht als virtuelle Maschine installiert, sondern auf einer pysikalischen Server mit Windows Server 2008 R2. Und an diesen wird dann direkt die USB 3.0 Festplatte angschlossen. So wenn man auf dem pysikalischen Server VMProtect 9 startet und sich über das Web-Interface anmeldet diesen Datenträger dann als Sicherungsmedium auswählt. Wird das unterstützt ?

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Posts: 22
Comments: 3800

Hi Michael,

Yes, this setup is supported. If you have vmProtect installed as Windows Agent then you can back up to USB drive connected to this machine, since such drives are recognized as internal drives (as opposed to CD-rom or flash drives which are considered as removable media).

The general rule is the following: any device which is recognized by Windows as removable media (CD-rom, flash drive, RDX, etc.) cannot be used as backup storage by vmProtect installed onto the same machine.

Thank you.
--
Best regards,
Vasily
Acronis vmProtect Program Manager