Probleme beim Testen der ATI 2018
Hallo Neu-Installer,
das Release / Build 9202 steht seit kurzer Zeit für max. 40 Tage bereit.
Bislang nutze ich noch die Vers. 2013 (früher 2009/2010), da ich mit den Nachfolge-Typen nicht immer zufrieden war. Die jetzige Version ist aber für mich interessant geworden, obwohl die Laufzeiten immer noch "ewig" dauern.
Vor der Neu-Installation unter aktuellem Windows 10 Pro habe ich das momentane System über den integrierten MS-"Wiederherstellpunkt" gespeichert. Dann aber löschte das neue 2018 die alten Acronis-Einträge, um sich selbst einzutragen.
Eine Wiederherstellung auf den ehemaligen Betriebszustand aber geht total "in die Hose", denn das alte ATI 2013 bleibt total gelöscht, so dass der Rechner plötzlich ohne irgendein ATI ist.
Fragen:
- Ist das so gewollt oder wo liegt das Übel?
- Lässt sich 2013 mit 2018 upgraden oder muss total neu gekauft werden?


- Log in to post comments

Mit der neuen Version 9207 haben wir versuchsweise das Laufwerk C:\ sowie die Bibliothek-Dateien auf einer externen HDD gespeichert und auch dort vorgefunden.
Versuche, mit Backup --> Recovery diese gespeicherten Werte zurück zu laden, scheitern, denn trotz Admin-Rechten erkennt ATI das HDD überhaupt nicht.
Was muss gemacht werden, dass das externe HDD-Lw G:\ angezeigt wird?
- Log in to post comments

wippigallus wrote:
With the new version 9207 we have stored the drive C: \ as well as the library files on an external HDD and also found there.
Attempts to back up these stored values with Backup -> Recovery fail because ATI does not recognize the HDD at all despite admin rights.
What needs to be done to display the external HDD-Lw G: \?
Sorry, but I am not sure that I understand what you have done here?
When you say you "have stored the drive C:\ as well as the library files on an external HDD" - do you mean you have backed up these to the external drive or you have moved them to the external drive? If the latter, then are you booting Windows from the external drive?
How is the external drive connected and how is it formatted?
What does Acronis show for the external drive or does it not show it at all?
- Log in to post comments

@wippi du kannst für 2013 eine Upgradelizenz auf 2018 kaufen. Eine 2017 Upgrade oder Vollversion kannst du auch kaufen. Diese sind derzeit ab 35 für 3 Computer zu haben (https://it-schweitzer.de/download-lizenzen/systemprogramme-tools-esd/sy…).
Diese lässt sich gemäß der Policy in eine 2018er Version eintauschen. siehe auch: https://kb.acronis.com/acronis-true-image-2018/upgrade
In jedem Fall ist aber kein sauberes Upgrade auf 2018 möglich. Die 2013 wird zuerst deinstalliert. Ich vermute deine Jobs und Einstellungen sind dann weg, ganz gleich ob du von 2013 auf 2017 und dann auf 2018 gehst oder direkt.
Bitte beachte auch, dass wir ein deutschsprachiges Forum haben. Ich hoffe dir geholfen zu haben.
- Log in to post comments
In reply to wippigallus wrote: … by truwrikodrorow…

Steve Smith wrote:
Sorry, but I am not sure that I understand what you have done here?
1) When you say you "have stored the drive C:\ as well as the library files on an external HDD" - do you mean you have backed up these to the external drive...?
2) How is the external drive connected and how is it formatted?
3) What does Acronis show for the external drive or does it not show it at all?
ad 1) The backup was sent to the externeal HDD directly
ad 2) That drive was backuped before with ATI 2013 correctly, it's connected by a cable
ad 3) Only the PC-drive-partition C:\ is present and no D:\ (anorther partition of the PC-HDD) and no external drive.
- Log in to post comments

Can you post some screen shots showing what you see for both Acronis and in Windows with regard to the external drive?
Did you uninstall ATIH 2013 before installing ATIH 2018?
- Log in to post comments
In reply to Can you post some screen… by truwrikodrorow…

Steve Smith wrote:
Did you uninstall ATIH 2013 before installing ATIH 2018?
YES i did!
- Log in to post comments

wippigallus, thanks for the screen images and confirmation that you uninstalled 2013 before installing 2018.
The message shown on your screen says it all:
There is no data to restore
Create your first backup so that its contents are displayed here
The issue here is that your GUI screen image shows a backup called: DESKTOP-E5AR0BC
but your other image only shows backup files for:
Bibliotheken_full_b1_s1_v1.tib
Lokales Laufwerk (C)_full_b1_s1_v1.tib
You need to locate DESKTOP-E5AR0BC_full_b1_s1_v1.tib (or other b and s numbers) in order to have data to Recover for this backup.
- Log in to post comments

Stevemith wrote:
You need to locate DESKTOP-E5AR0BC_full_b1_s1_v1.tib (or other b and s numbers) in order to have data to Recover for this backup.
Im Moment verstehe ich das noch nicht richtig, denn auch wenn ich meinen Rechner mit der Linux-basierten BOOT-DVD von ATI 2018 starte, wird das externe Laufwerk mit den BACKUPs nicht angezeigt.
Warum werden somit auch nicht die mit ATI 2013 erzeugten *.tib - erkannt? Weder mit Software_Programm noch Boot-DVD?
- Log in to post comments

Wippigallus wrote:
At the moment I do not understand this correctly, because even if I start my computer with the Linux-based BOOT DVD of ATI 2018, the external drive with the BACKUPs is not displayed.
Why are not the * .tib generated with ATI 2013? Neither with software program nor boot DVD?
What type of external drive is involved here? Is this USB 3.x or how is it connected?
I would recommend creating and using the Simple Rescue Media for ATIH 2018 which does not use Linux, but uses WinRE taken from the system where the Rescue Media Builder runs.
Your ATI 2013 .TIB files should be visible within Windows Explorer and in the ATI 2018 GUI if you take the option to 'Add existing backup', provided that they exist on the backup drive you are connecting.
- Log in to post comments
In reply to Wippigallus wrote:… by truwrikodrorow…

S. Smith wrote:
What type of external drive is involved here? ---> Toshiba-HDD 300 Gb or INTENSO-HDD 500 or 1000 Gb
Is this USB 3.x or how is it connected? USB 2.x
Here are the photos of the moment-status produced by the Linux-based-boot-disk. No external HDD is there wether in BACKUP nor in RECOVERY.
- Log in to post comments

Thanks for the further information and images. Very strange and I have no explanation for why you are not seeing your external disk drives, especially if these are USB 2.0 and relatively small capacity (1TB or less).
Can you see the drive(s) OK when booting from the ATIH 2013 Rescue Media?
- Log in to post comments
In reply to Thanks for the further… by truwrikodrorow…

S. Smith wrote:
Can you see the drive(s) OK when booting from the ATIH 2013 Rescue Media? --> YES
I have tested the ATI-2018-Build 9207 on 3 different PCs and with all 3 Extern-HDDs; but I d'nt find anywhere the externals wether with the installed software nor the boot-disk.
The explorer shows it well.
- Log in to post comments

I wonder if you are seeing the same issue as reported in topic: Rescue Media USB support
- Log in to post comments
In reply to I wonder if you are seeing… by truwrikodrorow…

S. Smith wrote:
I wonder if you are seeing the same issue as reported in topic: Rescue Media USB support
I will look for it but there are many terms to read.
----------~~~~~~~~~~~~~
Testing the ATI 2018 in Windows 10, 64 bit + Windows 7, 64 bit, brings always the same problems.
- Log in to post comments
In reply to I wonder if you are seeing… by truwrikodrorow…

Resume:
The new Acronis True Image (ATI) 2018 Build 9207 software is not suitable for Windows 10, Windows 7,
since in both cases different, external HDDs can only be detected and described in the BACKUP-mode.
A RECOVERY is impossible because external drives, which are wired via USB 2.x, are not found.
Even worse are the procedures when Linux-based boot disks are used.
In this case, an external drive with backups (* .tib) is not detected and reported.
Thus, no recoveries can be made.
If I create a UNIVERSAL_RESTORE_medium (ball as a desktop symbol), the following function is not reported:
"PCI \ VEN_1022 & DEV_7807 & SUBSYS_FC671179 & REV_11"
but I d'nt find it in the Internet.
Overall the current offered software is useless and d'nt replaces the old working 2011 +2013.
The described errors were sent to the German-Acronis-Support, until long however without further response.
- Log in to post comments
In reply to I wonder if you are seeing… by truwrikodrorow…

S. Smith wrote:
I wonder if you are seeing the same issue as reported in topic: Rescue Media USB support
I have read the posts and seen that it is not about the errors of external drives, but about hardware-functions.
But the fact is, the boot-disks are "faulty" programmed
- Log in to post comments

Windows 10: ATI 2018 + Explorer
Where is PRIM_1 (C:\) in Build 9207?
- Log in to post comments

Wippigallus, you need to click on "Vollstandige Volume-Liste" to see hidden / system partitions or drives.
- Log in to post comments
In reply to Wippigallus, you need to… by truwrikodrorow…

S. Smith wrote:
... you need to click on "Vollstandige Volume-Liste" to see hidden / system partitions or drives.
Thanks Steve, I just overlooked the thin text.
- Log in to post comments
In reply to Wippigallus wrote:… by truwrikodrorow…

S. Smith wrote:
"I would recommend creating and using the Simple Rescue Media for ATIH 2018 which does not use Linux, but uses WinRE taken from the system where the Rescue Media Builder runs."
On a computer, 2 operating systems are installed: Win 10 + Win 7
Can I boot both with only one floppy disk (Linux-based or WinPE)?
What datas can be found on the WinPE-disk?
- Log in to post comments

A new problem comes with ATI 2018, a fake programmed backup can not be deleted, in order to start the correct backup (files and not a complete-drive should be backed up).
The green button can not be deleted (Backup jetzt)
- Log in to post comments

Man kann den nicht gewünnschten Backuptask löschen, indem man auf den Haken hinter dem Backuptasknamen klickt und "Löschen" auswählt.
- Log in to post comments

Die bebilderte Anweisung hat toll geholfen. Danke!
- Log in to post comments