Skip to main content

WinPE Bootstick Display Auflösung ATI2020

Thread needs solution

Mein Laptop hat eine Display Auflösung von 2.560 x 1.600 Pixel. Damit sind die Menüs beim Booten vom Windows PE Bootstick stark abgeschnitten und auch die Fenster muß ich erstmal größer ziehen, um etwas lesen zu können.

Wie kann man das PE Rescue Medium anpassen, damit das vernünftig lesbar ist?

Ein Linux Medium kann ich nicht verwenden, da ich Treiber für eine Optane-SSD einbinden muß.

0 Users found this helpful

My laptop has a display resolution of 2,560 x 1,600 pixels. This means that the menus are severely cut off when booting from the Windows PE boot stick and I also have to enlarge the windows first to be able to read something.

How can you adapt the PE Rescue Medium so that it can be read properly?

I cannot use a Linux medium because I have to integrate drivers for an Optane SSD.

Berti, I can only recommend that you try using the MVP Custom PE Builder tool to create your rescue media, and include device drivers for your graphics display adapter to allow you to choose a suitable display resolution to be used, which should be lower than the values you are using per your post above.  You can include your drivers for Optane in the same media.

See the link in my signature for the tool.