Skip to main content

Can I still use the old source drive with OS in case something happens to the cloned ssd?

Thread needs solution

I plan to clone from my HDD(connected to SATA interface which will be my source drive) to SSD(connected on M.2 interface) on my laptop. 

Let's say I followed the instructions that I remove my source drive(not deleting anything from that HDD) after shutting down then the SSD boots successfully.

Is it possible to remove the cloned drive(SSD) and return my source drive(HDD) with OS to boot again in case something happens to my SSD?

0 Users found this helpful

Jensen, welcome to these public User Forums.

In principle it should be possible to do as you ask, i.e. remove the new M.2 SSD and reinstate the original HDD and boot into the OS, but this may require that you ensure the correct BIOS boot device is configured.

If your PC boots using UEFI from the HDD then this is more likely to be successful, as this mode is required in order to boot from your NVMe M.2 SSD, so both would be using the same BIOS boot mode of UEFI.

If you PC currently boots in Legacy BIOS boot mode, then you will need to migrate this to UEFI / GPT mode.

You can check the current BIOS boot mode by running the msinfo32 command in Windows then looking at the BIOS mode setting shown in the right panel of the report shown.