Skip to main content

Intel VMD Raid0 drive wont show up in the True Image 2021 BootStick!

Thread solved

welcome to these public User Forums.

In the simple WinPE / WinRE media, you need to close the ATI application window to reveal the command prompt underneath.

See the example below from one of my systems for when I wanted to check BitLocker status etc.

If you create the 'Simple' version of the ATI 2021 rescue media, and do this on Windows 10 Pro which has BitLocker support, then this is included in the rescue media but there are some steps that are needed in order to access a BitLocker encrypted drive in the rescue environment.

When you boot into the rescue environment, you will see a black Command prompt window along with the main ATI 2021 application window.  You need to close the ATI 2021 window in order to have access to the command prompt in the black window.

Now, you can use the BitLocker commands to identify and unlock your encrypted drive before relaunching the ATI 2021 application again using "X:\Program Files\Acronis\TrueImageHome\trueimage_starter.exe"

See the following data captured from my own system booted from the ATI 2021 Simple rescue media with an encrypted drive connected.

X:\windows\system32>wpeinit

X:\windows\system32>"X:\Program Files\Acronis\TrueImageHome\trueimage_starter.exe"
Terminate batch job (Y/N)? n

X:\windows\system32>manage-bde -status

BitLocker Drive Encryption: Configuration Tool version 10.0.19041
Copyright (C) 2013 Microsoft Corporation. All rights reserved.

Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume C: [Windows]
[Data Volume]

    Size:                 200.83 GB
    BitLocker Version:    None
    Conversion Status:    Fully Decrypted
    Percentage Encrypted: 0.0%
    Encryption Method:    None
    Protection Status:    Protection Off
    Lock Status:          Unlocked
    Identification Field: None
    Automatic Unlock:     Disabled
    Key Protectors:       None Found

Volume D: [SSD-Data]
[Data Volume]

    Size:                 263.29 GB
    BitLocker Version:    None
    Conversion Status:    Fully Decrypted
    Percentage Encrypted: 0.0%
    Encryption Method:    None
    Protection Status:    Protection Off
    Lock Status:          Unlocked
    Identification Field: None
    Automatic Unlock:     Disabled
    Key Protectors:       None Found

Volume L: [Label Unknown]

[Data Volume]

    Size:                 Unknown GB
    BitLocker Version:    2.0

    Conversion Status:    Unknown
    Percentage Encrypted: Unknown%
    Encryption Method:    AES 128
    Protection Status:    Unknown
    Lock Status:          Locked
    Identification Field: Unknown
    Automatic Unlock:     Disabled
    Key Protectors:
        Password
        Numerical Password

Volume H: [Data]
[Data Volume]

    Size:                 114.10 GB
    BitLocker Version:    None
    Conversion Status:    Fully Decrypted
    Percentage Encrypted: 0.0%
    Encryption Method:    None
    Protection Status:    Protection Off
    Lock Status:          Unlocked
    Identification Field: None
    Automatic Unlock:     Disabled
    Key Protectors:       None Found

X:\windows\system32>manage-bde -unlock L: -password
BitLocker Drive Encryption: Configuration Tool version 10.0.19041
Copyright (C) 2013 Microsoft Corporation. All rights reserved.

Enter the password to unlock this volume:
The password successfully unlocked volume L:.

X:\windows\system32>dir L:
 Volume in drive L is Seagate250gb
 Volume Serial Number is 1052-D550

 Directory of L:\

07/11/2020  00:08    46,379,683,840 MyBackup(1).tibx
05/11/2020  00:51    45,030,981,632 MyBackup.tibx
               2 File(s) 91,410,665,472 bytes
               0 Dir(s)  158,538,076,160 bytes free

X:\windows\system32>"X:\Program Files\Acronis\TrueImageHome\trueimage_starter.exe"

X:\windows\system32>

The alternative is to create the rescue media using MVP Assistant - New 2.0 with Rescue Media Builder (New Version 2.3.2)

This provides a desktop type environment from which to launch various tools including a command prompt window.

If you have issues with a PC that uses the Intel VMD storage controller and rescue media it is because to date there is no native driver support in any rescue media for this controller therefore, a driver must be added for the rescue media to work with this controller.

The driver can be found on your PC at C:\Windows\System32\DriverStore\FileRepository\iastorvd.inf_amd64XXXXXXX where the X's are an alphanumeric string.

This driver can be added to rescue builder by using the Bootable Rescue Media Builder found in the Acronis folder which appears by clicking the Windows Flag.

I personally recommend downloading and using the the MVP Assistant tool for rescue media building purposes found here:

MVP Assistant

The MVP Assistant  includes a GUI interface and offers a number of apps to be included in a rescue media build.

Mainboard-Raid has even worse Performance than the native one... So it's not the best idea from the beginning