Acronis True Image Home 2010 restore problem under Windows 7 Professional 64 bit & SATA2-RAID-1 => shared libraries
I am running True Image Home 2010 under Windows 7 Professional 64bit and SATA2-RAID-1 on a Gigabyte GA-P55-UD3 mainboard. The SATA2-RAID-1 array is built on the onboard Intel P55 chipset and two Samsung Spinpoint F3 1 TB HDDs. The RAID is separated in a C: and a D: partition. The OS and all applications are installed on C:. While earlier operating systems (WinXP Prof. 32bit, Vista Home 32bit) required a pre-installation RAID driver during the installation process, Win7 did not. Right after installing Win7 I installed the Intel Matrix Storage Manager (for the RAID) and subsequently Acronis True Image Home 2010 then several other applications. While installation of True Image Home 2010 as well as backups and Try & Decide with True Image Home 2010 worked well, recovery does not. I had run Acronis True Image 11 and 2009 on WinXP and Vista, also on RAID-1 systems, and never experienced any problems.
The problem is as follows: I had done a sector-by-sector backup of the C: partition in the Acronis Secure Zone and on an external HDD. When trying to recover the C: partition from the Acronis Secure Zone or the external HDD I get the following message during start up of the Acronis Loader / Startup Manager:
/bin/ipwatched: error while loading shared libraries: libpcap.so.0.9.4: cannot open shared object file: No such file or directory
RAID set "isw_hghehfjbe_T-Rex (name of the RAID)" was activated
The dynamic shared library "libdmraid-events-isw.so" could not be loaded: libdmraid-events-isw.so: cannot open shared object file: No such file or directory
While True Image Home 2010 seems to perform the recovery process, later on when re-booting the system it prompts that there is no BOOTMGR and the system does not boot anymore.
Help is urgently needed as I need my system for business purposes!
Thanks in advance
Raptor
Anhang | Größe |
---|---|
acronissystemreport_aug_23__2010_8_30_15_pm.zip | 68.65 KB |

- Anmelden, um Kommentare verfassen zu können