Direkt zum Inhalt

Acronis TI 2018 -Wiederherstellung-

Thread needs solution

Guten Tag,

ich arbeite erstmals mit dem Tool. Das Backup geht schnell u. problemlos.

Beim Versuch, ein Backup zurückzuspielen, erscheint folgende Meldung, die ich nicht interpretieren kann:

"Warnung!
Nach Abschluß der Aktion kann das Betriebssystem nicht mehr von dem Ziellaufwerk per BIOS booten".

Was ist zu tun ?

MfG Achim

0 Users found this helpful

Hans-Joachim, welcome to these User Forums.

The message you are seeing is warning you that you are recovering your computer using the Acronis Rescue media but that the BIOS mode being used to do this is different to the BIOS mode used by your Windows OS, thus if you go ahead and do this, the drive will be migrated to a different partition system and the OS will not boot correctly.

Please run the msinfo32 command on your working Windows OS and check what BIOS mode is being used, this can be either Legacy or can be UEFI.

When you boot from the Rescue Media, you need to select the same BIOS mode option.

If you select Legacy, the recovered drive will use MBR partitioning.

If you select UEFI, the recovered drive will use GPT partitioning.

See KB 59877: Acronis True Image 2017: how to distinguish between UEFI and Legacy BIOS boot modes of Acronis Bootable Media

KB 59877: Acronis True Image 2017: wie zwischen UEFI und Legacy-BIOS-Boot-Modus von Acronis Bootable Media unterscheiden for more information.

The image below shows how this may look when booting with 2 entries for SanDisk Cruzer boot media, one Legacy and one for UEFI:

bootmenu.png