Failure to image WD Velociraptor 300GB
I'll be glad to read FAQs and other articles but at the outset, I am not a double-E major and many of the articles I have read already are poorly written, confusing, and overly complicated. I want as simple an explanation as possible and with no steps left out.
Environment: Windows 7 64-bit, WD Velociraptor 300GB, Acronis True Image Home 2011, both drives are currently set for Simple and my current C: drive has no hidden or diagnostic partitions. No RAID. Should be about as simple as it can get.
Situation: Upgrading my boot drive from 150GB to 300GB. The current drive works fine, it's just about out of space. The existing drive is a WD Raptor. I tried Acronis for WD and it did a little better than Acronis True Image Home but ultimately did not boot.
Goal: Image old C: on new C:, reboot, everything works as before.
Result: Never able to boot.
More detail with Acronis True Image Home:
Followed instrux I found on the forums to make a bootable CD with Acronis on it, selected the clone option, Automatic, then as soon as the "copy" message displays, Acronis does one of two things:
a) 3/4 times it freezes, makes no progress.
b) 1/4 times it reported immediate write errors and made no further progress.
After reboot with old C:, did a couple of things:
1) Looked at the new drive in Windows Explorer, appeared unformatted.
2) Went into Disk Manager, formatted the new drive, copied data to it, no errors, worked fine.
My conclusion is the new HDD works fine. I also loaded Windows 7 from DVD and it boots fine. The ultimate workaround will be to do that and reinstall everything but it's worth trying Acronis another time if it's going to work.
- Anmelden, um Kommentare verfassen zu können