Blue Dead Window After Restoring Archive.Please help me!!!!
Hi.I have bootable ATIH 2011 Plus Pack.
I have PC and acer aspire one netbook.I have done my PC's partition backup with ATIH 2011 Plus pack.
This is my PC's parameters.
CPU: AMD Athlon(tm) XP 1800+ , 1.53 GHz
RAM - 480 MB
Video Card - 32MB onboard.
I whant to restore that backup to my acer netbook.
This is my netbook parameters.
Acer Aspire One Pro.
CPU: Intel(R) Atom (TM) CPU N270 @ 1.60 GHZ
Ram - 1024MB
Video Card - 256 MB onboard.
I restore my archive with bootable ATIH 2011 Plus pack.
1.I was chosed archive from my hdd external drive.
2.I chosed metod "Restore Disc and partition with Universal restore".
3.Chosed where my partition must be restored.
4.When come driver pack, i was unchecked installation drivers.
5.Then clicked "Pristupit".
When restore completed and coming driver restore part, my netbook displayed error that can not get PCI driver path from
system and chosed path.
Next time i was chosed path for drivers.I have Driver Pack Solution 11.I chosed path, where are drivers with *.zip or *.7zip
but some problem and when booting windows, coming blue death window.
What are the problem.But when i was creted my netbook's partition image and restored to my PC, it worked fine.
Please help me, in this moment my netbook was dead.
The drivers need to be unzipped, in the *.inf or *.oem version. Also avoid to have multiple drivers for the same things
Hi my brother, yes i have unziped, when i was restored archive and when restored drivers,all was ok, not any problem.But when booting windows, it again displaying dead blue window.Maybe drivers not installing? Please, send me example, how i must chose path for correct driver installation.Please help me, my netbook dead :(
One question, can windows installation via acronis dead RAM or start work bad , or no.
Look for the drivers of your new computer you want to restore to. Put them in their uncompressed format on a USB flahs drive that you can plug into your computer when you do the restore from the CD.
Boot the computer on the CD, restore using Universal restore and point ATI to the flash drive.
Universal Restore can be tricky to make work...
I don't understand the question about the RAM.
Yes, i have unziped my drivers (i have driver pack solution 11 and unziped drivers from OEM) and i have HDD External Drive.My archive and unziped drivers was in HDD External drive, and i have made ATIH 2011 Plus Pack bootable usb drive.
In driver section i have pointed Acronis to my driver path, but when restore completed and when i was rebooted netbook, in time of windows boot coming dead window. Maybe it depend of my windows Windows XP 2009 SP3 X86?
Pat L: I don't understand the question about the RAM.
i whant ask that can be windows installation dead my RAM (OZY)?
Felo,
You seem to be doing the right things with the drivers. Universal Restore is a complicated process: I don't expect to work in all cases. You best option is to contact Acronis support.
Are you asking whether an issue with the RAM would cause the restore to fail? Yes, it could. Do you suspect the RAM is failling?
Felo,
I know from experience that you have to point ATI to specific drivers, if you have several drivers for the same chipset, this will not work. Look for chipset and any hard disk controllers (if you have hardware RAID, there might be another controller). Check the manufacturer website to find the drivers they install, download them and unpack them from there, or find the same driver in your pack. Put all the drivers in the same folder (the one you will point ATI to).
Brother i can not get my netbook drivers,it was pack and i dont understand.I thunk that path,which i was chosed,only ini or inf files,but need driver too,yes?
Idont understand what i must do to solve this.
Write me driver's name,which are need before restore complation.
I cannot tell you the driver names: each computer is different.
Get that information about the chipset driver, IDE/SATA controllers from the manufacturer's web site.