Disk Director 10 on Embedded Controller
Embedded controllers are peripheral-limited mini-computers that access a backplane into which electronic equipment (signal analyzers, data acquisition equipment, digital I/O, etc.) are directly accessible from the controller and its software.

- Anmelden, um Kommentare verfassen zu können

I think the easiest method of working with the drive would be to connect it to another computer.
You may be able to copy the Windows 98 files onto a partition on the hard drive and then run the install from there.
For DD, have you tried using Media Builder to create a set of DD floppy disks? If you only include the Safe Mode version, it would use the least amount.
- Anmelden, um Kommentare verfassen zu können

Also, you should not be overly concerned about the Win 98 installer setting its partition as Active, and then you being unable to boot to Win 2000. If you can get DD 10 safe mode to work on a floppy, then you can boot to DD 10 to change the Active flag back to the Win 2000 partition. Even if you're unsuccessful with the boot floppy, you can always connect the disk to a PC running DD and change the Active flag.
- Anmelden, um Kommentare verfassen zu können