False alarm on disk health?
I got this email warning today:
Disk Samsung SSD 840 EVO 120GB, serial number S1D5NSADA71758E, size 120.03 GB
Disk health has fallen below the warning threshold.
Current health: 0%
Warning threshold: 70%
If I check using Drive Monitor and 3 other drive checkers, health is 100%. Why is this?

- Anmelden, um Kommentare verfassen zu können

Can you see in SMART parameters which value is below its threshold?
Here are some informations about how the Drive Health is calculated: https://kb.acronis.com/content/9264
Thanks!
- Anmelden, um Kommentare verfassen zu können

Thanks for the reply - where woud I find this?
Is this any use?
Anhang | Größe |
---|---|
394199-133864.jpg | 95.23 KB |
- Anmelden, um Kommentare verfassen zu können

Your capture is the right one.
There are several values taken into Acronis Disk Health Calculation including "Power-On Time Count" and "Start/Stop Count". These values will probably raise and disk health calculation is maybe incorect.
For modern SSD drives the WLC (Wear Level Count) is more interresting. Drive monitor was developed in 2010 and is not continued any more and doesn't respects the WLC attribute.
Some references found about WLC attribute:
http://superuser.com/questions/1037644/samsung-ssd-wear-leveling-count-meaning
https://www.reddit.com/r/techsupport/comments/3a1aft/samsung_840_evo_ssd_smart_values/
And officially by Samsung: http://www.samsung.com/semiconductor/minisite/ssd/downloads/document/SSD_Application_Note_SMART_final.pdf
In the second link is some explanation, the WLC raw value could reach 3000+ safely, your value is at 145, so far away from failing.
- Anmelden, um Kommentare verfassen zu können

Thanks, Raphael,
I've tried looking at assorted links before, and it makes my head hurt! :-)
I think you're saying the Drive Monitor stuff for SSD drives is drivel - right? And I can ignore the messages? That was my own feeling
- Anmelden, um Kommentare verfassen zu können

Thats right, Drive Monitor cannot detect the "newer" attributes like WLC and was not designed for SSDs, in your case you can safely ignore the warning.
- Anmelden, um Kommentare verfassen zu können

I have exactly the same issue. The Acronis Drive Monitor lists one of my drives as deficient (46%) showing critical event: "Uncorrectable Sector Count". However, the Piriform Speccy tool shows the drive in perfect health with the S.M.A.R.T. data showing no problems. Then, I ran the Windows 10 Disk Check utility. This also finds no problems with this disk. Since there are no problems found, there is no option to repair the disk. I am suspicious that the Acronis Drive Monitor is creating false error reports.
Anhang | Größe |
---|---|
395074-134116.pdf | 282.75 KB |
- Anmelden, um Kommentare verfassen zu können

Hi Rene,
As been said earlier in this thread Disk Health is being calculated by ADM. Your WD drive shows a value in Uncorrectable Sector Count which can be repaired in most cases as long as enough spare sectors are present.
I recommend the WD Data Lifeguard Diagnostics Tool to check your disk, it will generate an error report and may be helpful for further support by WD (replace the disk if warranty apply).
Please do make a backup of your data prior running the WD Tool and/or repairing defective sectors.
- Anmelden, um Kommentare verfassen zu können

Thank you for this useful information. I shall definitely make use of it.
Rene
- Anmelden, um Kommentare verfassen zu können