Direkt zum Inhalt

Snap Deploy with User Initiated Deployment

Thread needs solution

We PXE boot our laptops to the Acronis Snap Deploy 6 server to pull down the appropriate image for the hardware we are building.  I tried setting the network utilization to Multicast and Unicast, and it appears Unicast might be what we go with but further testing will prove that.  In general with either multicast or unicast set, it is taking a very long time - over 90 minutes to load the image.  It appears we are getting a rate of 11.26MB/sec.  One thing to note is that our laptops do not have an ethernet port.  As a result, we are using a USB-c to Ethernet adapter to connect them to the switch.    If I had to guess, this is what is slowing down the process that had taken 25 minutes for a laptop with an ethernet port to about 90 minutes for ones that are using the USB c to Ethernet adapter.  Has anyone also expereicned this?  If so, what are the options to increase the speed to get the image loaded faster.  For reference, our image in the tib file format is about 31GB.

We are completely off our corporate network, all IP's are local and on the same subnet, the image file is located on the harddrive of the snap deploy server. 

Anhang Größe
Acronis Design.GIF 18.25 KB
0 Users found this helpful
frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Beiträge: 2
Kommentare: 1727

Hello Troy.

I have updated the ticket raised by yourself.

You can expect a contact from our support in order to help you solving the issue.

Thanks in advance!