Direkt zum Inhalt

Universal restore Betriebssystem wird nicht gefunden

Thread needs solution

Hallo,

habe folgendes Problem.

Ich habe mit TrueImage ein Image von einem alten Fujitsu PC gezogen. So weit so gut. Habe dann den PC von der DVD gebootet und das Image auf den neuen Fujitsu P556 PC geschossen. Nach einem Neustart mit UniversalRestore gestartet, bekomme ich die Meldung das auf der Maschine kein Betriebssystem gefunden wurde??? Das kann allerdings nicht sein, denn wenn ich den PC normal starten lasse, startet Windows auch, nur kann ich weder die Maus noch die Tastatur bedienen.

Hat jemand eine Idee? Es ist wirklich dringlich.

Gruß und Danke

Martin

 

0 Users found this helpful

Martin Mosch wrote:

Hallo,

habe folgendes Problem.

Ich habe mit TrueImage ein Image von einem alten Fujitsu PC gezogen. So weit so gut. Habe dann den PC von der DVD gebootet und das Image auf den neuen Fujitsu P556 PC geschossen. Nach einem Neustart mit UniversalRestore gestartet, bekomme ich die Meldung das auf der Maschine kein Betriebssystem gefunden wurde??? Das kann allerdings nicht sein, denn wenn ich den PC normal starten lasse, startet Windows auch, nur kann ich weder die Maus noch die Tastatur bedienen.

Hat jemand eine Idee? Es ist wirklich dringlich.

Gruß und Danke

Martin

 

Hello, Have the following problem. I used TrueImage to take an image from an old Fujitsu PC. So far so good. I then booted the PC from the DVD and shot the image on the new Fujitsu P556 PC. After a restart with UniversalRestore started, I get the message that on the machine no operating system was found ??? This can not be, however, because when I start the PC normally, Windows starts, but I can neither use the mouse nor the keyboard. Does somebody has any idea? It is really urgent. Greeting and thanks Martin

Hi Martin,

What version of UR do you have installed - just to make sure it's current?  The version that is built into 2016 6581 should be the most current.  UR can be added to rescue media in 3 ways...

1) through Acronis, which picks it by default and uses Linux

2) through the UR media builder (C:\Program Files (x86)\Common Files\Acronis\UniversalRestore\UniversalRestore.exe) LInux based

3) thorugh UR media builder (C:\Program Files (x86)\Common Files\Acronis\UniversalRestore\UniversalRestore.exe) WinPE based.

Try # 2 first - you can add both 32-bit and/or 64-bit versions, but if your machine is UEFI booting, then you'll only see the option available for your bios type (64-bit in most cases).

If that doesn't help, if you have Windows ADK installed (directly from Microsoft - use the Windows 10 ADK 1511 - linked below as it can insall on Windows 7, 8, 8.1. and/or 10).  Download it, install the top 3 options (3.4Gb in size) and then build WinPE RescueMedia.  There is an option to include drivers for your system - in most cases, you won't need to add any, but this gives you the opportunity to add some. If you're using RAID as the SATA mode, or an NVME PCIE hard drive, then you should include RAID drivers for your controller.  The Intel Rapid Storage Technology (IRST) drivers are good for most people, but if you have a custom RAID controller like LSI, you may need to download those (use the version that matches your Windows ADK being used to build the rescue media) as well).  

IRST drivers from Intel:  https://downloadcenter.intel.com/download/26361/Intel-Rapid-Storage-Technology-Intel-RST-RAID-Driver?product=55005

64-bit IRST drives:  https://downloadcenter.intel.com/downloads/eula/26361/Intel-Rapid-Storage-Technology-Intel-RST-RAID-Driver?httpDown=https%3A%2F%2Fdownloadmirror.intel.com%2F26361%2Feng%2Ff6flpy-x64.zip

32-bit IRST drivers:  https://downloadcenter.intel.com/downloads/eula/26361/Intel-Rapid-Storage-Technology-Intel-RST-RAID-Driver?httpDown=https%3A%2F%2Fdownloadmirror.intel.com%2F26361%2Feng%2Ff6flpy-x86.zip