Acronis Startup Recovery Manager
Hi,
I have startup recovery manager activated and its showing as Acronis uploader in the bios as it should.
However, F11 key command fails to instigate the recovery !
I have disabled fast boot in the bios,and my version is 2017 build 5554
Any help would be appreciated
Thanks


- Anmelden, um Kommentare verfassen zu können

Thanks Steve
My bios indicates secure boot enabled ( disabling isn't straight forward ... )
I have created an Acronis Rescue Media USB stick , my C drive system is backed up on my F drive (.tib file)
My PC will boot to a USB drive, so will I be able to recover my system by this method instead of the F11 method?
Many thanks Steve for your help
Anhang | Größe |
---|---|
401770-135919.jpg | 906.46 KB |
- Anmelden, um Kommentare verfassen zu können

Yes, you can recover after booting from the ATI Rescue Media. In fact, that is the method recommend by most of us MVPs. I dislike the Acronis Startup Recovery Manager and the Acronis Secure Zone.
Create the ATI Rescue Media now and see if your system will boot into it. You want to check this now, not wait until an emergency.
- Anmelden, um Kommentare verfassen zu können

If you are able to boot successfully from your USB stick Rescue Media and do your backups that way, then this should be fine for any future recovery you may need to perform. This approach would always be needed should your hard disk drive fail and you had to do a 'bare metal' recovery from your backup image file.
- Anmelden, um Kommentare verfassen zu können

Some motherboards use F11 key for selection of boot devices, which may explain what you are seeing. ASRock use F11 for this purpose. It may also be that boot mode selection is somehow diabled in the bios.
Ian
- Anmelden, um Kommentare verfassen zu können

Thanks for your help guys, Ill check the USB boot now and let you know
- Anmelden, um Kommentare verfassen zu können

Ok just booted from USB, I clicked on the USB drive in the bios boot section and selected number 1 and it took me to Acronis :-)
Thanks all, much appreciated
- Anmelden, um Kommentare verfassen zu können

Good!
After creating a backup, Boot from the ATI Rescue Media, choose a files/folders restore and restore a couple of files. That will give you high confidence that you'd be able to do a full restore in an emergency.
- Anmelden, um Kommentare verfassen zu können