Direkt zum Inhalt

clonen image 2018

Thread needs solution

Hallo

Habe die Festplatte - wie schon des öfteren kpl. geklont - (2 identischen Festplatten) bisher ohne Probleme. Laut der Software auch diesmal ohne Probleme

ABER - vorher war die 2 Festplatte - auf die geklont wurde das Laufwerk E - jetzt ist die Festplatte nicht mehr da -ich kann sie nur im Gerätemanager finden. ?

0 Users found this helpful

Achim, welcome to these User Forums.

You wrote: 

Have the hard drive - as often cpl. cloned - (2 identical disks) so far without problems. According to the software, this time without problems

BUT - before that was the 2 hard drive - was cloned on the drive E - now the hard drive is no longer there - I can only find it in the Device Manager. ?

-------------------------

If you are cloning to a second internal disk drive and also booting into Windows with both of these drives still connected, then you run the risk of Windows encountering problems or becoming corrupted due to both of these drives having the same disk signature.

The purpose of cloning is meant to be to allow an identical copy of the 1st drive to be made on the 2nd drive, after which the 1st drive is removed and replaced by the new 2nd drive.

I suspect that your 2nd drive has had the drive letter E: removed in Windows Disk Management to try to prevent the problems described above.  You should be able to assign the drive letter back again in Disk Management if you are confident of doing this and understand the risks involved.

Translated using Google Translate

Wenn Sie auf ein zweites internes Festplattenlaufwerk klonen und auch in Windows booten, während beide Laufwerke noch verbunden sind, besteht die Gefahr, dass Windows Probleme bekommt oder beschädigt wird, da beide Laufwerke dieselbe Laufwerkssignatur haben.

Der Zweck des Klonens ist es, zu ermöglichen, dass eine identische Kopie des ersten Laufwerks auf dem zweiten Laufwerk erstellt wird, wonach das erste Laufwerk entfernt und durch das neue zweite Laufwerk ersetzt wird.

Ich vermute, dass auf der zweiten Festplatte der Laufwerksbuchstabe E: in der Windows-Datenträgerverwaltung entfernt wurde, um die oben beschriebenen Probleme zu vermeiden. Sie sollten in der Lage sein, den Laufwerksbuchstaben in der Datenträgerverwaltung erneut zuzuweisen, wenn Sie davon überzeugt sind und die damit verbundenen Risiken verstehen.

Deutsches Acronis Forum für Privatanwender

- Diskussion im Zusammenhang mit Acronis True Image 2016, Acronis True Image 2015, Acronis True Image 2014, True Image 2013 by Acronis, Acronis True Image Home 2012, Acronis True Image Online, Acronis Disk Director 12, Acronis Disk Director 11 Home, Acronis Drive Monitor, Acronis Migrate Easy 7.0