Acronis True Image 2014/2015 - 64GB and more RAM, recovery function do not work
Hello All,
I'm facing the problem that the Recovery Function of Acronis True Image 2014/2015 do not work with 64GB RAM installed. After reboot the Acronis loader is showing up, but a while later only a black screen appears and the recovery function hangs.
Some try and error overcome the problem when I reduced 64GB of RAM to 48GB.
I'm also refering to this post, where the same behaviour is reported but with no solution on the problem:
https://forum.acronis.com/forum/66884
I tried with Win7 SP1 and also Win 8.1, both english versions, both the same failure mode.
Please help, this is frustrating
Many thanks in advance

- Anmelden, um Kommentare verfassen zu können

Hi Karl,
I had a look at the other thread. Can you please provide specific information about your hardware. What brand / model of motherboard do you own. Is this a VM? I don't doubt you are having an issue, it would just be helpful for all to know more about your environment.
- Anmelden, um Kommentare verfassen zu können

Hello shadowsports,
many thanks for your reply! Please find below my configuration:
CPU Type HexaCore Intel Core i7-5930K, 4376 MHz (35 x 125)
Motherboard Name Asus X99-Deluxe (1 PCI-E x4, 5 PCI-E x16, 1 M.2, 8 DDR4 DIMM, Audio, Dual Gigabit LAN, WiFi)
Motherboard Chipset Intel Wellsburg X99, Intel Haswell-E
System Memory 49050 MB (DDR4-2133 DDR4 SDRAM)
DIMM-A1: Kingston HyperX KHX3000C15D4/8GX 8 GB DDR4-2133 DDR4 SDRAM (16-15-15-36 @ 1067 MHz)
DIMM-B1: Kingston HyperX KHX3000C15D4/8GX 8 GB DDR4-2133 DDR4 SDRAM (16-15-15-36 @ 1067 MHz)
DIMM-B2: Kingston HyperX KHX3000C15D4/8GX 8 GB DDR4-2133 DDR4 SDRAM (16-15-15-36 @ 1067 MHz)
DIMM-C1: Kingston HyperX KHX3000C15D4/8GX 8 GB DDR4-2133 DDR4 SDRAM (16-15-15-36 @ 1067 MHz)
DIMM-D1: Kingston HyperX KHX3000C15D4/8GX 8 GB DDR4-2133 DDR4 SDRAM (16-15-15-36 @ 1067 MHz)
DIMM-D2: Kingston HyperX KHX3000C15D4/8GX 8 GB DDR4-2133 DDR4 SDRAM (16-15-15-36 @ 1067 MHz)
BIOS Type AMI (05/15/2015)
Storage:
IDE Controller Intel(R) 9 Series Chipset Family SATA AHCI Controller
IDE Controller Intel(R) C610 series/X99 chipset sSATA AHCI Controller 1 - 8D62
Storage Controller Asmedia 106x SATA Controller
Storage Controller Microsoft Storage Spaces Controller
Disk Drive C:/ Samsung SSD 850 PRO 256GB (256 GB, SATA-III)
Disk Drive D:/ Samsung SSD 850 PRO 256GB (256 GB, SATA-III)
Disk Drive E:/ ST4000DX001-1CE168 (4000 GB, 5900 RPM, SATA-III)
Disk Drive F:/ ST2000DL003-9VT166 (2000 GB, 5900 RPM, SATA-III)
I'm recovering the image from D: to C: (where on C: is the system installed).
Installed 48GB of RAM reimage is possible, adding 2 more 8GB bricks will lead to a black screen during recover.
Any idea and many thanks,
regards Karlheinz
- Anmelden, um Kommentare verfassen zu können

Karl,
I've asked support to investigate this.
- Anmelden, um Kommentare verfassen zu können

Hi shadowsports,
I'm still facing this problem. Did you got any feedback from your support team.
I've installed now Win 10, the same problem, I suspect it's HW related but have no glue what's the problem.
Thanks and BR
Karlheinz
- Anmelden, um Kommentare verfassen zu können