backup
I do a backup, it lists a file on my external hard drive H:, when I go to validate the file I get a message that states that the file is "Corrupted". did this 2 times ....what or how do I back up a validated good process?
- Anmelden, um Kommentare verfassen zu können
Thanks Tuttle how do I run chkdsk on that H: Drive... a Western digital 2 terabyte external connected dirctly from the drive to a USB port
- Anmelden, um Kommentare verfassen zu können
Right-click the drive icon | Properties | Tools | Error checking | Check now: select both options.
OR
In CMD: chkdsk H: /R
(substitute your drive letter for "H")
- Anmelden, um Kommentare verfassen zu können
Ok came back from prop / tools / ck drive errors...with "Your device or disk was succesfully scanned" "No problems were found on the device or disk. It is ready to use.
- Anmelden, um Kommentare verfassen zu können
Did you select both test options? It doesn't seem like there was enough time for the full check.
- Anmelden, um Kommentare verfassen zu können
http://screencast.com/t/nD5ZosPfzs here is a screen shot of what im looking at on the H: drive after I do a validate.
Ill do another chk now http://screencast.com/t/zYrVTnOwI
- Anmelden, um Kommentare verfassen zu können
Check the USB cable. If you have another cable, try it. It wouldn't be the first time that a cable wasn't providing a solid connection. And try another USB port on the rear of the PC.
Try booting from the ATI2013 bootable Rescue Media and perform the validation from there.
You could also copy one of the .tib archives to your internal HD and try to validate it there. If it validates there but not on the external, then you'd know there's something wrong with the external or its connectionn to the PC.
- Anmelden, um Kommentare verfassen zu können