Direkt zum Inhalt

Boot disk Hangup for TIH 11

Thread needs solution

I've cloned my HD (WD 320GB SATA) to the one I'd like to be my primary (WD 1TB SATA).
After the cloning, I move the new HD into the SATA 0 spot, and boot from the "bootable media" disk (CD) I made. This starts to load, then runs through an outpouring of text about various devices and such and then gets stopped on a bit about the IEEE 1394. This is as far as it has gotten. Is there a problem with my boot disk? what can I do to get past the hold up?

I'm using the most recent build of Acronis True Image Home, 6696 on a Win 7 x64 Dell T3500

Thanks,
Craig

0 Users found this helpful

Hi folks,
i am running in to the same problem by backup the delivery state of several Dell Precision T3500. I am using the downloaded ISO of the most recent build of A TI 2011 Home #6696. Windows has not started jet.
With PowerEdge Server R710 this CD is working fine.

Thanks for any help.

Klaus

HI I am trying to boot into TIH 11as well on my T3500 but it hangs at

Using /lib/modules/nfs.ko

Anhang Größe
61646-94816.jpg 2.3 MB

You should submit a ticket to Acronis support to see about driver support.

Hello all,

Thank you for your posts and your help is appreciated Pat.

Craig, Klaus and Robert,

Would you be kind enough to get back to me with this report - Generating Acronis System Report from Acronis Bootable Media without Booting into GUI. This will help us understand why the issue occurs. I will forward the information to our Development team.

Please let me know if you need additional help.

Thank you.

I found success with the "safe mode" acronis boot disk, that I downloaded and burned as an .iso on my boot CD. I'm not sure that the report I generate will be as accurate since I've changed my hard drive configuration since the issue, but I can give it a try when I find time in the next few days. I've gone to Raid 1 with two HDs from the single HD I started with. I realized after I did the initial recovery that I had to setup the raid array, then do the recovery.

Craig

Hello all,

Craig, thank you for the follow-up.

I have some additional info that could be useful to anyone with a similar issue. One of our Customers was very kind enough to send me a private message with a description of how he got around this problem.

He used another computer to install Acronis True Image 2011 Home and he re-created the bootable media was functional. It appears there was some sort of corruption of the bootable media creator files or some third-party application was blocking those files.

You can either repair ATIH 2011 by launching the installation file, select to install ATIH 2011 and select repair, or try downloading the bootable media from your Acronis web-account.

This is only a temporary workaround since we are still working on determining the exact cause of this issue.

Please let me know if you have any other questions.

Thank you.

I am also facing the similar problem in my machine.
Please help me in solving this problem.I couldn't proceed further because of this problem

Thanks ,
Amar

Hello Amar,

Thank you for your post and welcome to our forum. I will definitely help you with this issue.

There are a few things that can be done to resolve it. You can do one of the following:

1. Try a workaround suggested by one of our Customers.

2. Collect this report and contact our Support team for a full investigation.

3. Download Acronis bootable media from your Acronis account.

Please let me know if you have any other questions.

Thank you.

Hello Anton,
Thanks for your quick reply.
As you said ,I tried to create the report (With rescue media -System report option).But my machine is hanging at the same place as before.

Do you have any idea? How to collect the report(I mean Location) ?

Regards
Amar

Hello Anton,
I contacted Acronis with the System report and they provided me solution.

Thank you very much for your suggestion

Amar

I am having the same issue with a Dell T3500. I tried downloading the bootable media from my account and also tried recreating a bootable media from another machine. NOTHING WORKS!

Please advise....

Hello Amar and Melissa,

Thank you for your posts. I am glad that the issue was resolved Amar.

Meilissa, please boot from the boot CD using this parameter: quiet acpi=off noapic

You can enter this parameter the following way - boot from the CD and in the disk menu press F11. In the prompt type this command and press OK.

If you need additional help please let me know.

Thank you.

Anton wrote:
please boot from the boot CD using this parameter: quiet acpi=off noapic

You an enter this parameter the following way - boot from the CD and in the disk menu press F11. In the prompt type this command and press OK.

Anton's solution worked beautifully on all our Dell Precision T3500 workstations for a PXE Recovery Media boot...

Sadly, this topic was hard to find as the thread topic is not what I would have searched for, and my issue was with Acronis Backup & Recovery 10...

Thanks Anton all those who participated in this thread and got it answered... How about adding it to some kind of FAQ or Knowledgebase?

Robert @ UVa

I have a machine that won't boot from the ATIH 2011 (Build 6942) Recovery Disk (created using the ISO I downloaded from my account). Two other machines boot successfully.

The output indicates a problem inserting usb-storage.ko:

Loader Output

This is after specifying "acpi=off noapic".

I'm stumped and invite your advice.

Anhang Größe
95552-100216.jpg 696.61 KB