guides daily schedule
Hi all. are looking for instructions or guides for the daily schedule for a full backup with Acronis True Image 2013. could you help me???
hello i have installed windows 7 and I do every day at a same time a full backup of my hard disk for any problems. what is the procedure with acronis 2013??
Read what Grover just posted.
Also, check out the many user guides and tutorials in the left margin of this forum, particularly Getting Started and Grover's True Image Guides which are illustrated with step-by-step screenshots.
And, here's a novel thought: read the manual?
thanks for the advice, but I have a doubt: in 2011 acronis true image when I plan a daily backup, you must create a backup location on another hard disk and the name of the backup is created automatically. in Acronis True Image 2013, this is not needed for the daily pianficiazione??
translated with google translator from Italian
You want to design 2013 to act the same as 2011. You should assign the backup name and you should assign the folder name and you should select the backup scheme. Link #2 below shows how but in English.
hello good morning, I tried to follow the link that you gave me and it seems to work. I attach screenshot of the result. give me confirmation that it is OK?? please and thank you.
The storage folder shows that two full backups were created on the 29th at about 4pm and another approximately 4 hrs later.
The same for the 30th or a total of 4 full backups crteated.
I understand you, but my goal is to do a full backup every day. this is the solution??? I just need confirmation that I do everything right.
Look again inside your backup storage folder. Do you have backups for the March1 and March 2?
If yes, then your schedule is working.
If you do not have backups for those days, check to see if your schedule is set to daily.
hello are you talking about the 01 and 02 April. right??
in those days the PC was turned off. then that's okay???
Oops. Yes, I was referrring to April 1 -2 not March.
If you get a new backup on the next scheduled day, then it would seem the schedule is working correctly.
oh thanks mister last question: if I have to restore my backup because the broken system, I start cd acronis 2013 boot and go on restore, ok??
Yes. This link will show you how.
http://forum.acronis.com/sites/default/files/mvp/user285/guides/tih2012…
hi mister, but now I have another problem. when I add new hard drive tells me disk added successfully, but I did not format it and always tells me not allocated. why does this happen??
thanks for all. regards
news for me???
When adding a new disk, , after connecting, it must be
partitioned by the user
formatted and drive letter assigned by the user
name assigned by the user
After the above is completed, the disk weill appear in Windows Explorer
When adding a new disk, , after connecting, it must be
partitioned by the user
formatted and drive letter assigned by the user
name assigned by the user
After the above is completed, the disk weill appear in Windows Explorer
Hi GroverH...
thanks for your reply, but after i add a new disk, how i partitioned by the user formatted and drive letter assigned by the user name assigned by the user??????
NEWS???
giancarlo ,
You need to get a friend to help you by showing you. I can't train you on basic skills and I am having difficulty understanding you questions. I would be glad to help but communications is an issue for me.
Good luck.
Grover
Giancarlo,
If you have installed a disk and True Image recovery CD can see it, all you need to do is to recover the image, True Image will do everything else.
If it can't see it, you need to use the ADD Disk as recommeneded by Grover.
If you are installing a second disk to your PC and you just want to use it, if Windows Explorer doesn't show it you can either open up Windows Disk Management (right click on My Computer, and select disk managment) and right click on the new disk shown there and select format or run True Image then Add Disk, afterwards you can format the drive by right clicking the drive in Windows Explorer and select format.
Windows will automatically offer a drive letter that can be used. You can optionally (recommended) add a name to the drive. Windows will call this a 'label'.
When Grover mentioned User, he meant you, but he was covering himself in case you were to do this to someone elses computer, in which case they need to be logged on to their computer..
giancarlo ,
You need to get a friend to help you by showing you. I can't train you on basic skills and I am having difficulty understanding you questions. I would be glad to help but communications is an issue for me.
Good luck.
Grover
hi GroverH....
sorry for my questions.
you write to me: "When adding a new disk, , after connecting, it must be partitioned by the user formatted and drive letter assigned by the user
name assigned by the user After the above is completed, the disk weill appear in Windows Explorer"
How i do this guide?????
Giancarlo,
If you have installed a disk and True Image recovery CD can see it, all you need to do is to recover the image, True Image will do everything else.
If it can't see it, you need to use the ADD Disk as recommeneded by Grover.
If you are installing a second disk to your PC and you just want to use it, if Windows Explorer doesn't show it you can either open up Windows Disk Management (right click on My Computer, and select disk managment) and right click on the new disk shown there and select format or run True Image then Add Disk, afterwards you can format the drive by right clicking the drive in Windows Explorer and select format.
Windows will automatically offer a drive letter that can be used. You can optionally (recommended) add a name to the drive. Windows will call this a 'label'.
When Grover mentioned User, he meant you, but he was covering himself in case you were to do this to someone elses computer, in which case they need to be logged on to their computer..
ok mister, thanks for the info, but with acronis true image 2011, when I added a disk asked me File System (NTFS or FAT32) format it automatically. acronis 2013 shall not be possible??
help me please....
A disk doesn't need to be formatted in order for True Image to recover an image to it, it just needs partition layouts added into the MBR.
When you recover an image the disk will take on whatever file system is within the image.
However, the 'add new disk' gives you the option to specifiy what file system you want the partition formatted as. Have you tried looking at page 201 section 8.6.3 of the User Manual (pages refer to the English language edition)? Here Acronis have provided some pictures and instructions as to how to use the Add Disk function for 2013, if you still have any questions please post them here.
thanks for your help colin, but I can not find the file syste voice with which I can format the new disk added. can you help me with screenshots please??? thank you again
news for me? help me for my problem???
Giancarlo,
I am attaching some screen shots.
Add new disk under utilities menu.
Select disk to add.
If drive has data on it, the following warning will show.
Right click on the disk you are adding.
Drop down box where the type of drive format is selected.
