Noobie question about terminology - did I choose the right option?
I just updated ATI 11 Home to the most recent upgrade due to issues with the original version not finding my HD. I have a computer at a family member's house that I get to rebuild the O/S more times than I'd like, so I'd like to send it back with a "clone" of the c: partition to another drive's partition so that I can talk them through a restore/reimage if they run into trouble again.
They have a 500GB HD that I've resized to 160GB. It is on a Dell so this partition (c:) is on a HD with 2 other partitions (Dell's image, and Utilities). My image will have all their installed software and updated drivers.
As normal I used a bootable CD. I then chose to make a "Backup Archive" - full. I did not choose to eliminate any file types. I kept "normal" compression. I have 4 questions.
1. If the normal C: O/S gets corrupted and I talk them through a recovery of the Backup Archive, have I achieved recovering the O/S, and apps? (I know they will have to pull off their data first and then put it back on.)
2. The backup archive was 18GB. If I chose a different compression setting, or resized the partition to 120GB, would it fit w/i 16GB. (I have 1 flash drive that size.)
3. Is it safe to keep a backup archive on a flash drive? I hate to buy a SATA drive for something so small, but a 32GB flash is more expensive.
4. Now that I have a .tib file, can I use something like Roxio to move it to DVD's (assuming I can get the .tib file smaller to fit on a few DVD's. Would these be safer than a flash drive?
Thanks.
PS OK How do I get a family member's name off this post so I won't be shot?

- Anmelden, um Kommentare verfassen zu können