True Image 2013 and Intel RAID 1
Hi!
I'm planning setting up a RAID 1 (Intel Matrix Technology) on Intel ICH10R with following configuration:
1. SSD (non-RAID) for OS (Win 7 64 bit)
2. 2x3TB HDDs as RAID 1 array
The SSD should be backed up by True Image 2013 (creating images which are saved on the RAID array).
My question now is the following: When I create a boot CD with True Image and want to recover the SSD image utilizing this boot disc, will the disc version of True Image recognize the RAID array correctly? My concern is that the disc version of True Image will not 'see' the RAID array (as one disc), but two seperate discs.
Is the Intel Matrix Technology fully supported by True Image 2013 (especially the boot disc version)?
Another question: I have two possibillities to create the RAID array: Just creating it in Windows with the Intel Storage software and creating it 'outside' Windows (CTRL+I while booting, create RAID array). Are there any differences between these to methods from True Image's ponit of view? Is one 'better' than the other?
Thanks in advance for any answers!
- Log in to post comments
Greetings,
I can confirm this. I have used 2012 and 2013 with the ICH10R Southbridge in systems running RAID 0 and 1. The boot media detected both configurations as a single disk after the RAID was created using ctrl+I. In my case, the OS was installed on my array and images were saved to a a single disk. It is possible to recover the other way RAID 0 or 1 to a single disk (SSD) in your case.
Also, a failure of one disk in RAID 1 will not keep you from reading from or writing to a degraded RAID 1.... you just won't have the mirror until the failed disk is replaced and re-mirrored.
- Log in to post comments