Aller au contenu principal

unable to restore backup win64-7 from tib file 2012 version 7119 *

Thread needs solution

i am trying to restore from a backup of my computer to a new hardware setup and am using universal restore. I get stuck at "specify recover settings for partition C.

i am recovering from an ssd 120gb to 240 gb SSD they both show up and i cannot select the new (240GB)SSD . They are both highlited if i click on ONE!!! if i select both (because there are no other options) the new location stays blank

Arun in Canada Thanks

0 Users found this helpful

very frustrating to pay extra to upgrade something that does not work..same set up i restored universal restore several times with Acronis 2011 version

problem solved:

Here is what i did
DO NOT SELECT ALL THREE (MBR, SYSTEM RESERVED, HD) partitions at the same time
first select mbr
then system reserved
then the actual hdd

it worked BUT IT SHOULD BE DOCUMENTED IN ACRONIS!!! 2012 version 7119

What a waste of a wonderful Sunday...spoke too soon..restored but FAILS to boot WTF....i am now mad at acronis

Dear akm expert, I have the same problem:
I often made the Backup of the system volume in ATIH 11 and restored it on another drive (HDD or SSD) easily with no problems.
- Now I changed to ATIH 12 (for Uefi-support), but I cannot recover even on another MBR-SSD.
- I only have my HDD with the backup and the new to restore system SSD attached.
- The recovery procedure ask me (my text is German, I try to translate) about the
. backup archive (on Vol 1),
. the recovery method (complete Volume),
. the source (Vol 2, MBR and Track 0, NTFS System (C)
. details about Part 2-1
. details on Part C, why these two different details? I do not have that, when I recover on the same SSD, from where the backup is.
==> the forward key is not highlighted so I cannot continue.
==> Does it mean, ATIH does not any more support the recovery on a different hard drive?
Any idea is welcome! Konrad

Konrad,
i have same as your problem i had none of these problems with Acronis 2011.. Any one reading this DO NOT UPGRADE TO 2012. You are in for frustrating experience. no help is available for 2012!!!

They need to fix this p[roblem Pretty pathetic that i cannot recover from my backup on a newer version which i was able to do older version..

Hallo kfranzk

Um von "MBR" auf UEFI "GPT" zu wechseln (auf dem gleichen PC) muss die Festplatte oder SSD leer (gelöscht) sein.

Windows 7 oder Windows 8 muss neuinstalliert werden um die "UEFI Systempartition" zu bekommen. Nach der Neuinstallation von Windows 7 oder Windows 8 wird mit Acronis True Image Home die Windows 7 oder Windows 8 Partition ausgewechselt (wiederhergestellt), auf keinen Fall beim Wiederherstellen den "MBR" anhaken. Vor der Neuinstallation von Windows 7 oder Windows 8 sollten alle anderen Festplatten abgehängt werden, damit alles wichtige auf der Festplatte oder SSD installiert wird.

@akm expert

Welches Mainboard wird verwendet?
-------
Which motherboard is used?

Fichier attaché Taille
100401-101173.gif 209.45 Ko

i am using Asus Sabertooth X-79 in the target system.. the backed up old motherboard was sabertooth x-58

Hallo akm expert

Wenn das neue X-79 System normal mit "MBR" (kein UEFI "GPT") wiederhergestellt werden soll, würde ich von Intel das "Inf update Utility" herunterladen und auf einem USB Stick entpacken, wenn man von der ATIH 2012 PP Boot CD startet kann man nachdem man Universal Restore aktiviert hat, die Treiber von dem USB Stick laden/ hinzufügen. Beim neuen X-79 System würde ich bei "Advanced Mode" - "Sata Mode" - "AHCI Mode" einstellen.

Inf Update Utility für Intel 7er Chipsatz (nfinst_autol.zip).

http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=816&DwnldID=…

---------------------------------------------------------
If the new X-79 system with a normal "MBR" (no UEFI "GPT") to be restored, I would download Intel's "Inf Update Utility" and unpack it onto a USB flash drive, when you boot from the CD ATIH 2012 PP and you have enabled Universal Restore, you able to load the drivers from the USB stick. The new X-79 system I in "Advanced Mode" would be - "Sata Mode" - set "AHCI Mode".

I hope the translation is usefull.

Fichier attaché Taille
100420-101179.gif 32.99 Ko
100420-101182.gif 194.44 Ko
100420-101185.gif 187.38 Ko
100420-101188.gif 414.93 Ko
100420-101191.gif 132.17 Ko
100420-101194.gif 362.48 Ko

AKM_Expert,

Did you make the image as a complete disk or per partition?

Are you restoring using the recovery CD?

complete disk but it has 3 components actual disk, mbr and "system reserved"

yes using recovery CD

I don't have access to my copy of TIH at this moment, but you should have two option available, one to restore the complete disk and the per partition one as you mention above.

You need to click on the partition link to change to complete disk.

yes if i click on complete disk the program DOES NOT allow me to pick one...i can only pick both drives...it is automatic.if i pick both nothing shows up under "settings for C" and i cannot proceed because >>> next >> button is greyed out...

How are the two disk connected in the PC?

Have you tried connecting the new one externally?