cloned bootable HD won't boot
For years I have happily used True Image Home 11 to maintain a bootable backup for the C: drive of my desktop PC running WinXP. By using the clone disk procedure, I always have a perfect copy to fall back on if my main disk fails, for no more effort than it takes to change the boot sequence.
Recently, I've come into several HP laptops. I thought it would be a good idea to clone the HD for each and have a similar fallback, but I have run into a problem. These laptops only take one HD, so I can't use the clone procedure running True Image 11 on the laptop itself, but must do it on my desktop. My procedure is
1) connect known good bootable laptop drive to desktop
2) clone laptop drive to a desktop drive
3) disconnect just cloned laptop drive and connect what will be the backup laptop drive (tested with Hard Disk Sentinel to be sure it is flawless)
4) clone desktop drive that holds laptop drive contents to backup laptop drive
All this goes without a hitch, but the clone laptop drive will not boot on the laptop, hanging up immediately when the laptop BIOS attempts it - as if the drive is not recognized.
Must a bootable clone be created on the PC on which it will be booted? Is there information on a HD that matches the copy of WinXP with the machine for which it is registered? Any thoughts on why the laptop clone will not boot?
- Se connecter pour poster des commentaires
Thanks for the good ideas, Grover. The docking unit (news to me) seems like the solution as it allows the duplication to take place from the machine where the HD will be used.
There must be something written on a HD that identifies the machine on which the OS was written to it. I tried booting the laptop HD on the desktop PC where I cloned it and, sure enough, it boots.
- Se connecter pour poster des commentaires
I have two Thermaltake docking units and both have worked withiout issue.
I have an older usb/esata unit plus a newer usb3.
I have found them very versatile and they work on both 3.5 and 2.5" drives.
There are other brands and styles if you want choices.
- Se connecter pour poster des commentaires