Aller au contenu principal

TI 2014 Cloning does not work - Becoming desperate...

Thread needs solution

Used True Image Version:
TI 2014 Build 6673 v. 17,0,0,1877
Country: Germany

PC: i7-2600K with 4 GB RAM.
System: Windows 7 Ultimate SP1

Problem:
Cloned SSD does not boot.

Re: 2 x Samsung SSD 840 Series ATA Devices - Cloning

Booting from a SAMSUNBG 2 TB SATA harddrive.
Launching True Image 2014.

Then cloning a Samsung SSD 840 Series Device (System, active) at SATA connection to
another Samsung SSD 840 Series Device at SATA connection.

The cloned SSD does not boot.
- Even if the BIOS settings are correct and/or the drives are switched.

=======================================================================

UPDATE:
_______
Now and new:
After controlling all drives and the system I tried TI 2014 again for cloning.
All seemed to be running well.

However:
Hitting GO the application startaed the calculation of the ETA.
Then it annonced that a RESTART would be necessary.
Agree...
Now the message:
Activation of Acronis Bootable Agent failed.
More details displayed:
"Mehr Informationen über diesen Fehler und mögliche Lösungen können online in der Acronis Knowledge Base verfügbar sein.
Um auf die Online-Ressource manuell zugreifen zu können, geben Sie den Ereignis-Code hier ein:
http://kb.acronis.com/errorcode/
Ereignis-Code:
0x005F0025+0x005F0014+0x00040003+0x0000FFF0+0x8007045D"

Going to that page and entering the code did not help: "Unknown code"!

What to do?
Is TI 2014 not supporting (certain) SSD devices?

REM: After all operations with errors the system was rebooted.

For any help/hints my thanks in advance.
Regards,
Manfred

0 Users found this helpful

Do the clone from the recovery CD, not from Windows. Make sure you don't reboot with the clone and the source connected at the same time.