Defektes Backup - Lässt sich nicht mounten oder öffnen
Hallo,
ich habe heute ein Backup von meiner SSD gemacht, dass ich auch erfolgreich abgeschlossen habe.
Als ich dieses Backup dann wieder aufspielen wollte kam der Fehler "Das ist nicht das letzte Volume eines Backup-Archivs". Auch das lokale Validieren schlug mit dem Ereignis-Code:"0x01010005+0x01010005+0x01E50015+0x01E5001A+0x0004000E " fehlt.
Gesichert habe ich von einer SSD auf eine externe SSD.
Vielen Dank


- Se connecter pour poster des commentaires

Bei "Das ist nicht das letzte Volume eines Backup-Archivs" ist das Backup-Archiv das wiederhergestellt werden soll nicht vollständig.
- Se connecter pour poster des commentaires

Steve Smith wrote:Chris, welcome to these public User Forums.
I made a backup of my SSD today that I have successfully completed.
When I tried to restore this backup I got the error 'This is not the last volume of a backup archive'. Local validation also failed with the event code: '0x01010005 + 0x01010005 + 0x01E50015 + 0x01E5001A + 0x0004000E' is missing.I have secured from an SSD to an external SSD.Are you able to still boot into Windows on this computer?
If yes, then please check the log for the backup of your SSD to see if there are any error messages given?
Please download the MVP Log Viewer tool (link in my signature below) and use this to review the log file for your backup operation.
Thanks for replying. The actual problem is, that the system, how it has been when I created the backup doesn´t exsist anymor.
Still thank you for the tip!
- Se connecter pour poster des commentaires

G. Uphoff wrote:Bei "Das ist nicht das letzte Volume eines Backup-Archivs" ist das Backup-Archiv das wiederhergestellt werden soll nicht vollständig.
Achso, ok. Vielen Dank! Habe so keine genaue Definition zu diesem Fehlercode gefunden.
Gibt es denn einen Weg das Backup bzw. die Reste davon wiederherzustellen?
Bin bislang nicht wirklich schlauer aus dem was im Internet steht geworden.
- Se connecter pour poster des commentaires

Man könnte versuchen, das Backup-Archiv noch mit doppelklick zu durchsuchen, ich befürchte allerdings, das das Backup-Archiv nutzlos ist.
- Se connecter pour poster des commentaires

G. Uphoff wrote:Man könnte versuchen, das Backup-Archiv noch mit doppelklick zu durchsuchen, ich befürchte allerdings, das das Backup-Archiv nutzlos ist.
Das Archiv mithilfe des Doppelklicks zu öffnen blieb auch ohne Ergebnis.
Ich bin langsam mit meinem Latein am Ende.
Fichier attaché | Taille |
---|---|
520622-176535.jpg | 89.71 Ko |
- Se connecter pour poster des commentaires

Chris, was this backup created by ATI 2020 as a Disk & Partitions backup?
Has the backup file been renamed since it was created?
If you change the file extension from .tib to .tibx can you double-click and open it in Explorer?
- Se connecter pour poster des commentaires

Steve Smith wrote:Chris, was this backup created by ATI 2020 as a Disk & Partitions backup?
Has the backup file been renamed since it was created?
If you change the file extension from .tib to .tibx can you double-click and open it in Explorer?
The image was created by Acronis 2019 as a Fullbackup.
I actually don´t know if it has been renamed though.
Unfortunately, changing the file extension didn´t work.
- Se connecter pour poster des commentaires

Chris, sorry but it does seem as if the backup has become corrupted here.
The only other test I can suggest is to boot from the Acronis Rescue Media and try doing a validation of the backup file in that way to see if that succeeds or not?
In the rescue media, you need to open the Recovery option then right-click on the file to see the validate option.
- Se connecter pour poster des commentaires

Steve Smith wrote:Chris, sorry but it does seem as if the backup has become corrupted here.
The only other test I can suggest is to boot from the Acronis Rescue Media and try doing a validation of the backup file in that way to see if that succeeds or not?
In the rescue media, you need to open the Recovery option then right-click on the file to see the validate option.
Thank you for helping. Unfortunately it didn´t work either. However, I´ve just recently tried to restore the backup with the "MultiExtractor". Luckiely it could restore a huge part of the backup. Even though they just got a numeric name without any directory structures. There are still some corrupted data, but at least it did what Acronis couldn´t. Most disappointing was the support. Just stopped answering, didn´t even closed the ticket.
- Se connecter pour poster des commentaires