Aller au contenu principal

Eine Partition zurückschreiben auf eine Platte die zwei Partitionen anthält / Restore to Partition 1 from a Disk that contains 2 Partitions

Thread needs solution

Situation b1)
Ich habe von der Harddisk 1 im System (SSD) den MBR, die Bootpartition und die Windows-Partition in ein Image "ImageW7_2019" gesichert.
Auf der zweiten physikalischen Festplatte im System (HDD) liegt noch eine alte Windowsinstalltion "alt" in der ersten Partition. In der zweiten Partition liegen Daten.
Situation b1)
I have made an Image "ImageW7_2019" from the first Harddisk (SDD) in the System. The Image contains the MBR, the bootpartition and the Windows-Partition.
There is a second physicaly harddisk (HDD) in the System. On the disk there is an old windowsinstalltion "alt" in the first partion of this drive. In the second partion are "Data".
(siehe/see b1_Anfangszustand.jpg).

Situation b2)
Zuerst habe ich versucht das Image "ImageW7_2019" direkt in die noch existierende Partition der Festplatte 2 zurückzuschreiben
HIER BEKAM ICH EINE FEHLERMELDUNG: Es kann nicht in eine Partition der Festplatte geschreiben werden, wenn noch eine andere existiert.
Situation b2)
First i tried to restore the image "ImageW7_2019" direct to the existing partion of the seond diskdrive.
I GET AN ERRORMESSAGE: You can't restore a partion when ther is a second partion existing on the drive.
(siehe/see b2_Image-direkt-zurueckspielen.jpg)

Situation b3)
Mit Hilfe der Windows 7 Setup-CD habe ich den Bootsektor, die Bootpartition und die Windowspartition gelöscht
Dann habe ich versucht das Image "ImageW7_2019" in die leere nicht zugeordnete Partition der Festplatte 2 zurückzuschreiben
HIER BEKAM ICH WIEDER DIE FEHLERMELDUNG: Es kann nicht in eine Partition der Festplatte geschreiben werden, wenn noch eine andere existiert.
Situation b3)
Using a Windows 7 Setup-CD, I deleted the bootsector, the bootpartition and the windowspartition
After this I tryed to restore the image "ImageW7_2019" to the empty non assigned Partiotion of ther harddisk 2.
I GET ALSO AN ERRORMESSAGE: You can't restor a partion when ther is a second partion existing on the drive.
(siehe/see b3_Image-in-leere-Partition-zurueckspielen.jpg)

Situation b4)
Wieso kann hier nicht zurückgeschrieben werden wenn es doch bei einer HD mit Datenpartition funktioniert. Der freie Platz hat doch schon mal
einen Bootsektor, eine Bootpartition und Windows enthalten, also müssen doch die Spuren die für Bootsektor und Bootpartition benötigt werden
noch frei sein.
Situation b4)
Why i cant write back although it works on a system with on harddisk and a datapartition. The "emtpy space" on this disk already contains
a MBR, abootpartition and a Windows-Partition. The sectors containg the MBR and Bootpartition are avaiable and free.
(siehe/see b4_So-soll-es-sein.jpg)

Info
Ich habe mit der Boot-CD von TI den MBR, die Bootpartition und die WIndows-Partition in ein Image gesichert.
Mit "Recover" konnte ich bei Probleme mit Windows oder Programmen diese Partion immer wieder herstellen.
Das hat immer geklappt.
(siehe b9_So-habe-ich-es-mit-einer-Platte-gemacht.jpg)

Danke und Grußs
Regards, thanks a lot
Robert

0 Users found this helpful

Robert, while your images are informative of the partition layout for your old / new schemes, they do not show any information about how you are attempting to do this restore or any messages being generated by ATI in that process?

One immediate thought.

Assuming that you have created the Acronis rescue media and have tested booting this in Legacy boot mode as indicated by your partition layout with no EFI System partition shown, then shutdown and disconnect the first HDD to leave only the second drive connected.

Boot from the ATI rescue media and then try the restore again but doing so Partition by Partition.
Note: do not select to restore at a Disk level or your second Data partition will be wiped as the disk is prepared to recover only the partitions found in the backup image.

Hallo Steve,

Thanks for your answwer. At the moment I'm very busy with an other project. I will get back and give further information.

I will try your way to do it.

Regards Robert