Boot failure after imaging OS Win7-64 SSD to usb hdd (TI2010 build 14.010)

Thread needs solution
truwrikodrorowrelupicugojestutroclulachosaswunuhospikigawakijosaswenomaruclojeueclikaspedrubewidebrisubrohutrurifruuagothunugekedrumucisiuobrobrecrupeslapuswosluprothethibakaslechurathikucli
Beginner
Contributions: 5
Commentaires: 5

Upon rebooting after the backup image was complete:

Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:

1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."

Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.

So I booted from Win7 DVD and did the repair whereupon the bootloader displayed 3, win7 ultimate lines, with the 2nd one booting win7 properly. If I backup to an internal rather than USB HDD I have no problems.

I understand why repair created 3 entries as I have win7 on G, C and the usb (G is a backup, usb was for testing align offsets) which became "unknown" but I don't understand why TI changed my SOURCE boot config which forced me to "repair" in the 1st place.

Thanks for any help.........................

Here is my bcdedit enum /all after the usb image and repair:

C:\Windows\system32>bcdedit /enum all

Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume3
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {default}
resumeobject {9f8ea850-b5cf-11df-80ce-b27a0e06a12f}
displayorder {9f8ea857-b5cf-11df-80ce-b27a0e06a12f}
{current}
{9f8ea859-b5cf-11df-80ce-b27a0e06a12f}
toolsdisplayorder {memdiag}
timeout 3

Windows Boot Loader
-------------------
identifier {9f8ea851-b5cf-11df-80ce-b27a0e06a12f}
device unknown
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {9f8ea852-b5cf-11df-80ce-b27a0e06a12f}
recoveryenabled Yes
osdevice unknown
systemroot \Windows
resumeobject {9f8ea850-b5cf-11df-80ce-b27a0e06a12f}
nx OptIn
quietboot Yes
usefirmwarepcisettings No

Windows Boot Loader
-------------------
identifier {9f8ea852-b5cf-11df-80ce-b27a0e06a12f}

Windows Boot Loader
-------------------
identifier {default}
device unknown
path \Windows\system32\winload.exe
description Windows 7 Ultimate (recovered)
locale en-US
recoverysequence {9f8ea852-b5cf-11df-80ce-b27a0e06a12f}
recoveryenabled Yes
osdevice unknown
systemroot \Windows
resumeobject {cce45599-d728-11df-995e-806e6f6e6963}

Windows Boot Loader
-------------------
identifier {9f8ea855-b5cf-11df-80ce-b27a0e06a12f}

Windows Boot Loader
-------------------
identifier {9f8ea857-b5cf-11df-80ce-b27a0e06a12f}
device unknown
path \Windows\system32\winload.exe
description Windows 7 Ultimate (recovered)
locale en-US
osdevice unknown
systemroot \Windows

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Ultimate (recovered)
locale en-US
osdevice partition=C:
systemroot \Windows
resumeobject {fab4ddf4-d746-11df-8fc5-806e6f6e6963}

Windows Boot Loader
-------------------
identifier {9f8ea859-b5cf-11df-80ce-b27a0e06a12f}
device partition=G:
path \Windows\system32\winload.exe
description Windows 7 Ultimate (recovered)
locale en-US
osdevice partition=G:
systemroot \Windows

Windows Boot Loader
-------------------
identifier {9f8ea85a-b5cf-11df-80ce-b27a0e06a12f}

Windows Boot Loader
-------------------
identifier {9f8ea85c-b5cf-11df-80ce-b27a0e06a12f}
device ramdisk=[C:]\Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a1
5d-b5cf-11df-80ce-b27a0e06a12f}
path \windows\system32\winload.exe
description Windows Recovery Environment (recovered)
locale
osdevice ramdisk=[C:]\Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a1
5d-b5cf-11df-80ce-b27a0e06a12f}
systemroot \windows
winpe Yes

Windows Boot Loader
-------------------
identifier {9f8ea85e-b5cf-11df-80ce-b27a0e06a12f}
device ramdisk=[G:]\Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a1
5f-b5cf-11df-80ce-b27a0e06a12f}
path \windows\system32\winload.exe
description Windows Recovery Environment (recovered)
locale
osdevice ramdisk=[G:]\Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a1
5f-b5cf-11df-80ce-b27a0e06a12f}
systemroot \windows
winpe Yes

Resume from Hibernate
---------------------
identifier {9f8ea850-b5cf-11df-80ce-b27a0e06a12f}
device unknown
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice unknown
filepath \hiberfil.sys
debugoptionenabled No

Resume from Hibernate
---------------------
identifier {cce45599-d728-11df-995e-806e6f6e6963}
device unknown
path \Windows\system32\winresume.exe
description Windows 7 Ultimate (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice unknown
filepath \hiberfil.sys
debugoptionenabled No

Resume from Hibernate
---------------------
identifier {fab4ddf4-d746-11df-8fc5-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows 7 Ultimate (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume3
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Device options
--------------
identifier {9f8ea853-b5cf-11df-80ce-b27a0e06a12f}
description Ramdisk Options
ramdisksdidevice unknown
ramdisksdipath \Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a12f\boot.sdi

Device options
--------------
identifier {9f8ea856-b5cf-11df-80ce-b27a0e06a12f}
ramdisksdidevice unknown
ramdisksdipath \Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a12f\boot.sdi

Device options
--------------
identifier {9f8ea85b-b5cf-11df-80ce-b27a0e06a12f}
ramdisksdidevice unknown
ramdisksdipath \Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a12f\boot.sdi

Device options
--------------
identifier {9f8ea85d-b5cf-11df-80ce-b27a0e06a12f}
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a12f\boot.sdi

Device options
--------------
identifier {9f8ea85f-b5cf-11df-80ce-b27a0e06a12f}
ramdisksdidevice partition=G:
ramdisksdipath \Recovery\9f8ea852-b5cf-11df-80ce-b27a0e06a12f\boot.sdi

jeu 14/10/2010 - 15:11
0 Users found this helpful
truwrikodrorowrelupicugojestutroclulachosaswunuhospikigawakijosaswenomaruclojeueclikaspedrubewidebrisubrohutrurifruuagothunugekedrumucisiuobrobrecrupeslapuswosluprothethibakaslechurathikucli
Beginner
Contributions: 9
Commentaires: 13

1. First Load Windows RE from Windows 7 or Server 2008 R2
2. Open Diskpart and make problematic partition Active
3. Open bcdedit and you should get something like this:
You problem is here in " "
"Windows Boot Loader
-------------------
identifier {9f8ea857-b5cf-11df-80ce-b27a0e06a12f}
device unknown"
4. Enter these commands:

bcdedit /set {Your-OS-Identifier} device partition=X:
bcdedit /set {Your-OS-Identifier} osdevice partition=X:
bcdedit

Where X: - drive letter with your problematic OS in Windows RE. You can find it by opening notepad and pressing save

5. Reboot

jeu 14/10/2010 - 21:14