Aller au contenu principal

Using Acronis TI9 to either make a clone or an image of my WD hard drive?

Thread needs solution

HI, I made my subject title simple to ask forumites to assist me with this Mission Possible. I have an older 200gb WD drive that is beginning to die on me. I want to either clone or image the data on it, around 16gb, to the other hard drive on my computer or a 16gb usb stick.

Now, should I make an image or a clone if I want the usb stick usable....or should I just clone the hard drive to the newer WD 500gb second drive? I guess what I am asking is, what is the best path to take at this crossroads? I am sure this has been addressed before, but I have spent the last 2 days in resolving computer problem woes hell, so need your help, thanks for listening, will await your expertise, DR

0 Users found this helpful

I just reread my request and realized I need to preface the inquiry. Should I or can I dump all the stuff on the WD hard drive to the 16gb usb stick first, for safety, and then clone the older hard drive to the new one? I keep reading that you don't clone to the usb stick but you image to it, am I correct? I do see and think I can accomplish a cloning to the newer hard drive as thanks to many posters here and everywhere this seems like a simpler procedure, well, must bid my adieu and be patient, thanks again, DR

Derek Richards wrote:
HI, I made my subject title simple to ask forumites to assist me with this Mission Possible. I have an older 200gb WD drive that is beginning to die on me. I want to either clone or image the data on it, around 16gb, to the other hard drive on my computer or a 16gb usb stick.

Now, should I make an image or a clone if I want the usb stick usable....or should I just clone the hard drive to the newer WD 500gb second drive? I guess what I am asking is, what is the best path to take at this crossroads? I am sure this has been addressed before, but I have spent the last 2 days in resolving computer problem woes hell, so need your help, thanks for listening, will await your expertise, DR

If you need the entire disk imaged, make a full disk backup, not a clone.
But, do you actually need that? If its not a system disk, but contains just user data files, you could simply use a file-based backup tool.

Stop using the disk completely until you're ready to do the backup. The more you use a failing drive, the more likely that you'll lose everything. As it is, you may be unable to retrieve everything.

Thanks for the response, Tuttle. I guess I never make my needs clear even though I have been inquiring on the Net for years. The older hard drive DOES have XP and some of my programs for making music on it. I really don't want to make a mistake here...can I just make a backup of the older drive by dumping it onto 16gb thumb drive, or should I be safe and clone it to newer hard drive which I know is in great shape, then take out older drive and put the new one in its place, OK< all replies and wisdom appreciate. DR

Derek Richards wrote:
can I just make a backup of the older drive by dumping it onto 16gb thumb drive, or should I be safe and clone it to newer hard drive which I know is in great shape, then take out older drive and put the new one in its place,

I already answered that:
If you need the entire disk imaged, make a full disk backup, not a clone.

Once you install a good, replacement disk, you would boot from ATI bootable Rescue Media to perform a full disk restore of the image to the new drive.

Check out the many user guides and tutorials in the left margin of this forum, particularly Getting Started and Grover's True Image Guides which are illustrated with step-by-step screenshots.
29618: Grover's new backup and restore guides http://forum.acronis.com/forum/29618

Well, here we go. The ATI9 bootable disk didn't allow me to make a backup. I had to use the ATI proggie and it is doing it as I speak. Can I ask a simple question? Why is all this creating, making bootable CD's, backing up,etc. so difficult. I have spent the last few days literally running into snag after snag. I wish the creators of these products could sit behind me and see what happens when we attempt to do some of these tasks.

I mean, I created another ATI bootable disk, and it came up on boot and I went in but it would not, repeat, would not, let me backup my C drive to my bigger I drive and they are both from WD. Am I going to have more problems trying to restore this image later on, just asking. Anyway, thanks for all the assistance, keep the wisdom rolling in, DR

Read the backup part of Grover's new backup and restore guides http://forum.acronis.com/forum/29618
That shows step-by-step what to do, although it will differ somewhat as you're using a much older version. I suspect that, as you're new to this, you may be doing something wrong.

Yes, I am new to the program, although it did work great on the backup. It was in the bootable disk manner that I couldn't accomplish it, but I know sometimes the littlest simple things that everyone who uses it have already ran into in their learnings...well, it gets overlooked. I think it was in the where to save area that it got muddled up, you know the renaming region. I didn't have a lick of trouble in the method when it was booted up and ATI was open, hmm. Anyway, it is done, so now, will get another hard drive, then, of course, recovery mode or restoring image to it mode. Pray it goes all right, again, appreciate all the assistance, DR