Salta al contenuto principale

Usage of dedicatet Backup interface possible in 12.5

Thread needs solution

Hi - back with next issue...

 

We used NICs dedicatet for backup in 11.7 - simply by adding the the agents with the backup interface ip address.

 

This is no longer possible in 12.5 !!!

We tried manual registration from Agent (RegisterTool) - but there are no options which interface to use.

We cannot change the DNS to the backup interface, because the primary interface is used for the servcies the machine is running.

 

Any good ideas for a solution/workaround?

 

Thanks

Günther

0 Users found this helpful
frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Messaggi: 22
Commenti: 3800

Hi,

The backup traffic is always sent by the agent through the NIC interface which is defined in routing table to access specified backup destination. For example if you have 10.1.x.x and 10.2.x.x interfaces for 2 separate networks then specifying the backup location as \\10.2.x.x or \\10.1.x.x will effectively define which NIC will be used. In other words the backup location should be set by IP address from required network and there is no requirement to register agent in AMS in specific network for this purpose (agent can use both networks). Could you please clarify whether this solution is possible for you? If not then please clarify how the network is set up in your environment, so that I can advise further.

Thank you.