Böse Überraschung!
Hallo,
in meinem Desktop-PC (W7/64pro) arbeiten 2 Festplatten so vor sich hin: eine System-SSD und eine 2-TB-HDD; auf dieser soll täglich beim erstmaligen Herunterfahren ein inkrementelles Backup gespeichert werden. So wird beim nächtlichen Herunterfahren stets die Meldung angezeigt, daß erst noch Acronis am Werk ist. Ich fühl(t)e mich also sicher, gegen Datenverlust gefeit zu sein.
Gestern schaute ich per Windows Explorer mal in den Backup-Ordner. Und was mußte ich feststellen? Es waren (seit Juli) etliche tägliche Sicherungsdateien vorhanden, die letzte allerdings vom 20. August! Hä? Ich hatte doch täglich die Acronis-Abwartemeldung gesehen ...
Umgehend öffnete ich ATI: sofort sprang mir eine Meldung über Schreibfehler ins Auge (leider im ersten Schreck vergessen, einen Screenshot zu machen). Lt. CrystalDiskInfo ist bei beiden Laufwerken aber alles in bester Butter.
Also startete ich per Klick auf "Backup jetzt" ein Backup bei gleichzeitigem Häkchensetzen für "Nach Backup herunterfahren". Beim heutigen Hochfahren schaute ich dann als erstes in den Backup-Ordner: es gab gleich 2 Backups! Offenbar wurde der Anweisung gefolgt, daß beim erstmaligen Herunterfahren ein Backup gespeichert werden soll - na gut. Gleichzeitig waren alle früheren Backups gelöscht worden - dabei wurde jedoch nur die Anweisung befolgt, alle Backups, die älter als 9 Tage sind, zu löschen Das war davor aber nicht geschehen ....
Was mich jetzt absolut stört ist die Tatsache, daß es 10 Tage lang keine Meldung von ATI über das Schreibproblem gab! Wenn ich nicht zufällig drauf gestoßen wäre, bestünde das Problem weiterhin.
Und noch ein weiteres Manko: auf der SSD befinden sich Dateien im Umfang von rund 550 GB. Die alle 7 Tage zu speichernden vollen Backups waren immer so ca. 450 GB groß. Insofern hätte ich erwartet, daß das händisch angestoßene (1.) Backup auch diese Größenordnung haben würde. Allerdings hat es "nur" ca. 250 GB, während das zweite gut 200 GB groß ist:
Was habe ich falsch gemacht? Was kann ich machen, daß jetzt ersteinmal ein vollständiges Backup geschrieben wird? Und vor allem: Wie gehe ich vor, um bei einem gescheiterten Backup sofort benachrichtigt zu werden?
Für sachdienliche Hinweise dankt im voraus
reinhardz


- Accedi per poter commentare

Steve Smith wrote:
I would recommend downloading the MVP Log Viewer tool (from the Community Tools link in my signature) as this can help you review your backup log files to see what messages are being given.
Hello,
Many thanks for the immediate reply.
As to the Log Viewer tool it can be read in the attached PDF file that it applies only to ATI 2017&2018 ...
Next, I would recommend that you use the Notifications option for your backup task, so that an email is sent to you with a copy of the Log file contents plus an indication of whether the backup was successful or not. This would warn you after each daily backup action if anything was wrong.
I will definitely do so!
Your screen image of the backup files shows simply that your latest full backup image has been split into 2 parts as indicated by having the same name but with _v1 & _v2 in the name. Both of these files are required for a recovery and their total size (205GB + 253GB = 458GB approx.).
Thanks again for the explanation.
Best regards
reinhardz
- Accedi per poter commentare

Reinhardz, the Log Viewer Tool will work will ATI 2016 through 2019 and can handle both the old log format from 2016 & 2017 and the newer format used in 2017 Next Gen, 2018 and 2019. The handling is automatic based on the logs found but can also be switched manually via the menu options offered.
- Accedi per poter commentare

Hello,
Is there a webpage where I can find explanations regarding error messages in the log file?
Many thanks in advance
reinhardz
- Accedi per poter commentare

Sorry, there is no published explanations for any of the log file messages that I am aware of..!
You are welcome to ask here in the forums and we will try to help with explanations where we can.
- Accedi per poter commentare

Okay. So may I post here the log files for the last three days?
But there are - unfortunately - two additional problems. At the end of the files of Sept 1st and Sept 2nd one can read "message=Batch operation has been terminated by user." The same could be seen when opening ATI today.
I never and at no time terminated any operation carried out by acronis!
At last, I am not able to configure the notification option. Although I think I have registered everything correctly, so far every attempt to send a test mail fails.
So, what are my faults?
Thanks in advance for help
reinhardz
Allegato | Dimensione |
---|---|
460285-151878.jpg | 135.05 KB |
460285-151880.jpg | 216.25 KB |
- Accedi per poter commentare

Reinhardz, sorry but the first image (user stopped?) doesn't tell us anything more than just that.
For the second image of your Notifications settings, try using port 587 / TLS (select the bottom TLS option first which will automatically set the correct port), the reason for this is that the version of SSL (port 465) used by ATI is very old and insecure, so rejected by most ISP's now.
See KB 59265: Acronis True Image 2017: how to set up email notifications about backup status which has more information.
Have you tried using the MVP Log Viewer tool yet to look at the log messages?
- Accedi per poter commentare

Reinhardz, sorry but the first image (user stopped?) doesn't tell us anything more than just that.
You are right. I just wanted to point out that there is a problem with ATI because I never ever stopped any operation!
For the second image of your Notifications settings, try using port 587 / TLS (select the bottom TLS option first which will automatically set the correct port), the reason for this is that the version of SSL (port 465) used by ATI is very old and insecure, so rejected by most ISP's now.
Hmm. Those are specifications of my provider. The screenshot on the right is from the according webpage of my provider.
But I have tried port 587 / TLS anyway, yet still without success.
See KB 59265: Acronis True Image 2017: how to set up email notifications about backup status which has more information.
Thanks for the link. I will klick it soon and try to find the right information (I am not a software expert ...).
Have you tried using the MVP Log Viewer tool yet to look at the log messages?
Oh yes. That's why I asked about a source with explanations regarding error messages in the log file; "message=Batch operation has been terminated by user." is, for example, a quote from the last two log files.
Best regards
reinhardz
- Accedi per poter commentare

Reinhardz, thanks for the clarification. Can you post the contents of one of the logs where it says that you terminated the backup task?
I suspect that the task may have been cancelled due to some other action on your computer rather than you doing something directly.
You may need to check the Windows Event logs for any activities happening at the same time as the task is terminated?
Note: If you want to create an Acronis System Report, this captures both the ATI task logs and the Event logs in a zip file.
- Accedi per poter commentare

Steve Smith wrote:Reinhardz, thanks for the clarification. Can you post the contents of one of the logs where it says that you terminated the backup task?
Of course:
log uuid=912CC0D8-FC87-416A-B6AB-6AEF335A63E9; product=True Image; version=19.0; build=6595; task=9529D17C-2B69-4956-A38C-02E81D676436; task_name=Samsung SSD 850 PRO 1TB
Start= 03.09.2018 01:56:04
id=1; date/time=03.09.2018 01:56:04; message=Backup reserve copy attributes: format tib; need_reserve_backup_copy false
id=2; date/time=03.09.2018 01:56:04; message=Operation Samsung SSD 850 PRO 1TB started by schedule.
id=3; date/time=03.09.2018 01:56:06; message=Backup reserve copy attributes: format tib; need_reserve_backup_copy false
id=4; date/time=03.09.2018 01:56:06; message=Aktion: Backup
id=5; date/time=03.09.2018 01:56:06; message=Priority changed to Low.
id=6; date/time=03.09.2018 01:56:06; message=Backup-Archiv erstellen Von: Laufwerk 1 In Datei: X:\Mein Backup\Samsung SSD 850 PRO 1TB.tib Komprimierung: Normal Exclude: Durch Ausschlussmaske erfasste Dateien Passendes Kriterium: hiberfil.sys, pagefile.sys, $Recycle.Bin, swapfile.sys, System Volume Information, *.tib, *.tib.metadata, *.~, *.tmp, C:\Users\________ _______\AppData\Local\Temp, C:\Users\W7-Standard\AppData\Local\Temp, C:\Users\Administrator\AppData\Local\Temp, C:\Users\Gast\AppData\Local\Temp, C:\Users\________ _______\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\W7-Standard\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\Administrator\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\Gast\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Windows\CSC
id=7; date/time=03.09.2018 01:56:08; message=Pending operation 172 started: 'Volume-Image erstellen'.
id=8; date/time=03.09.2018 01:56:47; message=Schreibe inkrementelle Version zu Datei: Samsung SSD 850 PRO 1TB_inc_b3_s3_v1.tib
id=9; date/time=03.09.2018 01:56:47; message=Pending operation 172 started: 'Volume-Image erstellen'.
id=10; date/time=03.09.2018 01:58:59; message=Pending operation 172 started: 'Volume-Image erstellen'.
id=11; date/time=03.09.2018 01:58:59; message=Die folgenden Backups wurden erfolgreich erstellt:X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s3_v1.tib
id=12; date/time=03.09.2018 01:58:59; message=Backup-Archiv validieren Speicherort: X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s3_v1.tib
id=13; date/time=03.09.2018 01:58:59; message=Pending operation 4 started: 'Backup-Archiv validieren'.
id=14; date/time=03.09.2018 01:59:26; message=Die spezifizierte Datei existiert nicht: .; line_tag=0x4D3F22948E29F1C7
Error_Code=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
id=15; date/time=03.09.2018 01:59:26; message=Die spezifizierte Datei existiert nicht.; line_tag=0x1D8EAB676A3F695B; hide=1
id=16; date/time=03.09.2018 01:59:26; message=Die spezifizierte Datei existiert nicht.; line_tag=0x6517E0ECF4E10266; hide=1
id=17; date/time=03.09.2018 01:59:26; message=Cannot perform this operation in quiet mode. (0x103F1) $module = ti_demon_vs_6595 TrueImage::Archive::ArchiveMsgReadCallbackProcessor::ProcessReadCallback: <link url='execute://%VS_PATH%\Common7\IDE\devenv.exe @k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp /command Edit.GoTo 983'> k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp(983)</link> (0x1E50023) $module = ti_demon_vs_6595 TrueImage::Archive::ArchiveMsgReadCallbackProcessor::ProcessReadCallback: <link url='execute://%VS_PATH%\Common7\IDE\devenv.exe @k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp /command Edit.GoTo 984'> k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp(984)</link>
id=18; date/time=03.09.2018 01:59:27; message=Terminated by user.
id=19; date/time=03.09.2018 01:59:33; message=Senden der E-Mail-Benachrichtigung fehlgeschlagen.
id=20; date/time=03.09.2018 01:59:34; message=Batch operation has been terminated by user.
Start= 03.09.2018 01:56:04
Finish= 03.09.2018 01:59:34
Total Time= 00:03:30
I suspect that the task may have been cancelled due to some other action on your computer rather than you doing something directly.
I can't imagine what I am doing allegedly to terminate the operation (id=18)
Backups are to be stored when my PC is started or shut down the first time in a day. Therefore, when I - after midnight - click "Shut down", the Windows shutdown message is displayed on the monitor's screen followed by the message that Acronis is busy: that's all. The next time that I press any PC button is when I switch it on in the course of the new day.
You may need to check the Windows Event logs for any activities happening at the same time as the task is terminated?
I'll try to find the logs - I'm not a computer expert at all <shrug>.
Note: If you want to create an Acronis System Report, this captures both the ATI task logs and the Event logs in a zip file.
Sorry, but for which purpose? I'm not able to do anything with it :-( ...
Thanks again and best regards
reinhardz
- Accedi per poter commentare

Reinhardz, thanks for the log data - this shows that the actual backup task was successful but that an error occurred when the task tried to perform a Validation of the new .tib file.
Operation Samsung SSD 850 PRO 1TB started by schedule.
The following backups have been successfully created:
X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s3_v1.tib
Validate Backup Archive
Location: X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s3_v1.tib
Pending operation 4 started: 'Validate backup archive'.
The specified file does not exist
The specified file does not exist
The specified file does not exist
Can not perform this operation in quiet mode.
Terminated by user.
Failed to send e-mail notification.
Batch operation has been terminated by user.
I would suggest initially to try to perform a validation for this task as a separate action - there have been some known issues with a combined backup followed immediately by validation.
The 'terminated by user' is a result of the validation failure where a response is needed but can't be requested because this was a scheduled task with no user interaction (quiet mode).
- Accedi per poter commentare

Bei der E-Mail-Benachrichtigung würde ich das "Von:" Feld leer lassen.
Bei "SMTP Authentifizierung" würde ich den ersten Buchstaben groß schreiben "R".
Bei dem Backup bei herunterfahren, würde ich im Backuptask bei "Erweitert" - "Computer herunterfahren" den Haken bei "Alle laufenden Aktionen stoppen, wenn ich den Computer herunterfahre" entfernen.
Beim herunterfahren gibt es dann eine Fehlermeldung und man kann mit "Abbrechen" wieder zurück auf den Desktop, im wartenden Backuptask dann anhaken das der PC nach dem Backup herunterfährt.
(Probieren, ob das einen Unterschied macht.)
- Accedi per poter commentare

Steve Smith wrote:I would suggest initially to try to perform a validation for this task as a separate action - there have been some known issues with a combined backup followed immediately by validation.
I've tried to find a "Validation now" button, unfortunately without success. How can I start just a validation?
The 'terminated by user' is a result of the validation failure where a response is needed but can't be requested because this was a scheduled task with no user interaction (quiet mode).
Thank you very much for the explanation - I'm kind of relieved ;-).
Best regards
reinhardz
- Accedi per poter commentare

G. Uphoff wrote:Bei der E-Mail-Benachrichtigung würde ich das "Von:" Feld leer lassen.
Bei "SMTP Authentifizierung" würde ich den ersten Buchstaben groß schreiben "R".
Hab' ich beides gemacht - leider erfolglos.
Bei dem Backup bei herunterfahren, würde ich im Backuptask bei "Erweitert" - "Computer herunterfahren" den Haken bei "Alle laufenden Aktionen stoppen, wenn ich den Computer herunterfahre" entfernen.
Beim herunterfahren gibt es dann eine Fehlermeldung und man kann mit "Abbrechen" wieder zurück auf den Desktop, im wartenden Backuptask dann anhaken das der PC nach dem Backup herunterfährt.
(Probieren, ob das einen Unterschied macht.)
"Alle laufenden Aktionen stoppen, wenn ich den Computer herunterfahre": Das kann ich bei ATI2016 leider nicht finden - auf Wunsch mache ich gern einen Screenshot.
Für die Tips dankt
reinhardz
- Accedi per poter commentare

reinhardz wrote:I've tried to find a "Validation now" button, unfortunately without success. How can I start just a validation?
- Accedi per poter commentare

Steve Smith wrote:
Thank you very much. Sometimes you can't see the forest for the trees <sigh> ...
Best regards
reinhardz
- Accedi per poter commentare

"Alle laufenden Aktionen stoppen, wenn ich den Computer herunterfahre" Bei mir gibt es die Option.
ATI 2016 Build 9595 (Abonnement Version)
Allegato | Dimensione |
---|---|
460408-151919.GIF | 333.27 KB |
- Accedi per poter commentare

G. Uphoff wrote:"Alle laufenden Aktionen stoppen, wenn ich den Computer herunterfahre" Bei mir gibt es die Option.
ATI 2016 Build 9595 (Abonnement Version)
Bei mir auch, aber nicht an der Stelle (= erweiterte Planungsmaske), wo ich gesucht habe.
Ich kann mir den Ablauf aber noch nicht so recht vorstellen :-(.
Meine Voreinstellungen: Backup beim erstmaligen Herunterfahren; Herunterfahren nach Abschluß Backup.
Zusätzlich jetzt: das besagte Häkchen ist rausgenommen.
Dann, irgendwann nach Mitternacht:
1. Ich klicke auf "Herunterfahren".
2. Das Herunterfahren beginnt.
3. Es kommt eine Fehlermeldung.
4. Ich breche das Herunterfahren ab.
Und jetzt? Läuft das Backup jetzt weiter? Außerdem ist das das, was Du vorschlägst,
im wartenden Backuptask dann anhaken das der PC nach dem Backup herunterfährt.
bei mir ja schon eingestellt.
Um nähere Erklärung bittet
reinhardz
- Accedi per poter commentare

In der Theorie, wenn man das Herunterfahren abgebrochen hat und angehakt ist, das der PC nach dem Backup herunterfährt angehakt ist sollte ATI 2016 das Backup erstellen und nach dem Validieren den PC herunterfahren, eine weitere Aktion, wenn man das Herunterfahren abgebrochen hat, ist meiner Meinung nach nicht erforderlich.
Ich werde es später noch einmal testen.
- Accedi per poter commentare

Steve Smith wrote:For the second image of your Notifications settings, try using port 587 / TLS (select the bottom TLS option first which will automatically set the correct port), the reason for this is that the version of SSL (port 465) used by ATI is very old and insecure, so rejected by most ISP's now.
Notification problem solved :-)!
In the meantime I once again played around with the different registration options, also regarding the port number. And, hurray, with a certain configuration, it finally worked! If somebody should have the same problem as me, he should look at the attachment: there you can find the screenshot with my entries.
For all help and patience in explaining thanks a lot
reinhardz
Allegato | Dimensione |
---|---|
460473-151933.jpg | 151.88 KB |
- Accedi per poter commentare

Bei mir wird beim Herunterfahren " Acronis True Image is terminating the current operations, please wait. The computer will be turned off automatically in about two minutes. " solange angezeigt bis das Backup und das Validieren fertig ist und fährt dann herunter. (Wenn schon angehakt ist, das der PC nach dem Backup herunterfährt.)
- Accedi per poter commentare

G. Uphoff wrote:Bei mir wird beim Herunterfahren " Acronis True Image is terminating the current operations, please wait. The computer will be turned off automatically in about two minutes. " solange angezeigt bis das Backup und das Validieren fertig ist und fährt dann herunter. (Wenn schon angehakt ist, das der PC nach dem Backup herunterfährt.)
Genauso ist es bei mir. Deshalb war ich ja so verwundert, daß es plötzlich
"message=Batch operation has been terminated by user."
hieß.
Ciao
reinhardz
- Accedi per poter commentare

Steve Smith wrote on Sat, 09/01/2018 - 12:20:Reinhadz wrote:
[...]
Your screen image of the backup files shows simply that your latest full backup image has been split into 2 parts as indicated by having the same name but with _v1 & _v2 in the name. Both of these files are required for a recovery and their total size (205GB + 253GB = 458GB approx.).
Hello,
Today, I manually started a validation. To my surprise it stopped after a short time because it couldn't find version 1 of the latest full backup (see log file below, "id = 8" and "id = 9"). After I had been able to show where to find that version ATI resumed the validation. Unfortunately it's missing a certain file: can you interpret the error code?
log uuid=0DA141CC-848E-4813-8517-BE8E63B18372; product=True Image; version=19.0; build=6595; task=8843402C-ABF7-4D1B-9FF5-950A3DAE218A; task_name=Backup validation
Start= 05.09.2018 10:27:45
id=1; date/time=05.09.2018 10:27:45; message=Operation Backup validation started manually.
id=2; date/time=05.09.2018 10:27:47; message=Priority changed to Low.
id=3; date/time=05.09.2018 10:27:47; message=Backup-Archiv validieren Speicherort: X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s5_v1.tib
id=4; date/time=05.09.2018 10:27:47; message=Pending operation 4 started: 'Backup-Archiv validieren'.
id=5; date/time=05.09.2018 10:28:48; message=Die spezifizierte Datei existiert nicht: .; line_tag=0x4D3F22948E29F1C7
Error_Code=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
id=6; date/time=05.09.2018 10:28:48; message=Die spezifizierte Datei existiert nicht.; line_tag=0x1D8EAB676A3F695B; hide=1
id=7; date/time=05.09.2018 10:28:48; message=Die spezifizierte Datei existiert nicht.; line_tag=0x6517E0ECF4E10266; hide=1
id=8; date/time=05.09.2018 10:28:48; message=Kann Version 1 nicht finden. Sie haben das Objekt möglicherweise verschoben oder gelöscht. Klicken Sie auf Durchsuchen, um einen Speicherort zu spezifizieren oder ignorieren Sie diese Meldung.: ⎂Wiederholen//⎂Abbrechen/
id=9; date/time=05.09.2018 10:29:27; message=Kann Version 1 nicht finden. Sie haben das Objekt möglicherweise verschoben oder gelöscht. Klicken Sie auf Durchsuchen, um einen Speicherort zu spezifizieren oder ignorieren Sie diese Meldung.: ⎂Wiederholen//⎂Abbrechen/: Benutzereingabe:
id=10; date/time=05.09.2018 11:14:57; message=Operation has succeeded.
Start= 05.09.2018 10:27:45
Finish= 05.09.2018 11:14:57
Total Time= 00:47:12
Thank you very much in advance,
best regards
reinhardz
- Accedi per poter commentare

Validate Backup Archive Location: X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s5_v1.tib
Pending operation 4 started: 'Validate backup archive'.
The specified file does not exist:
The specified file does not exist.
The specified file does not exist .;
Can not find version 1. You may have moved or deleted the object. Click Browse to specify a location or ignore this message: ⎂Repeat // ⎂Cancel /
Can not find version 1. You may have moved or deleted the object. Click Browse to specify a location or ignore this message: ⎂Repeat // ⎂Cancel /: User Input:
Operation has succeeded.
What actual files are found in your X:\Mein Backup\ folder location for this Samsung SSD 850 PRO 1TB backup task?
Have you manually deleted or moved any files belonging to this task?
If you repeat the validation for this task, do you see the same error messages. Have you used the Cancel (to ignore) option for each missing file?
- Accedi per poter commentare

Steve Smith wrote:What actual files are found in your X:\Mein Backup\ folder location for this Samsung SSD 850 PRO 1TB backup task?
Have a look at the attachment, please.
Have you manually deleted or moved any files belonging to this task?
Not at all!
If you repeat the validation for this task, do you see the same error messages.
I'll report about it.
On the other hand, such a message about a non-existing file can be found in the log files of Sept 2nd and 3rd, too. Here's the log file of Sept 2nd:
log uuid=D903AA27-495E-4E84-BF66-CA99BAB834C5; product=True Image; version=19.0; build=6595; task=9529D17C-2B69-4956-A38C-02E81D676436; task_name=Samsung SSD 850 PRO 1TB
Start= 02.09.2018 02:37:05
id=1; date/time=02.09.2018 02:37:05; message=Backup reserve copy attributes: format tib; need_reserve_backup_copy false
id=2; date/time=02.09.2018 02:37:05; message=Operation Samsung SSD 850 PRO 1TB started by schedule.
id=3; date/time=02.09.2018 02:37:07; message=Backup reserve copy attributes: format tib; need_reserve_backup_copy false
id=4; date/time=02.09.2018 02:37:07; message=Aktion: Backup
id=5; date/time=02.09.2018 02:37:07; message=Priority changed to Low.
id=6; date/time=02.09.2018 02:37:08; message=Backup-Archiv erstellen Von: Laufwerk 1 In Datei: X:\Mein Backup\Samsung SSD 850 PRO 1TB.tib Komprimierung: Normal Exclude: Durch Ausschlussmaske erfasste Dateien Passendes Kriterium: hiberfil.sys, pagefile.sys, $Recycle.Bin, swapfile.sys, System Volume Information, *.tib, *.tib.metadata, *.~, *.tmp, C:\Users\R_______ _______\AppData\Local\Temp, C:\Users\W7-Standard\AppData\Local\Temp, C:\Users\Administrator\AppData\Local\Temp, C:\Users\Gast\AppData\Local\Temp, C:\Users\R_______ _______\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\W7-Standard\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\Administrator\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\Gast\AppData\Local\Microsoft\Windows\Temporary Internet Files, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Users\Administrator\AppData\Local\Google\Chrome\User Data\Default\Cache, C:\Users\Administrator\AppData\Local\Opera Software, C:\Users\Administrator\AppData\Local\Mozilla\Firefox\Profiles, C:\Windows\CSC
id=7; date/time=02.09.2018 02:37:10; message=Pending operation 172 started: 'Volume-Image erstellen'.
id=8; date/time=02.09.2018 02:37:52; message=Schreibe inkrementelle Version zu Datei: Samsung SSD 850 PRO 1TB_inc_b3_s2_v1.tib
id=9; date/time=02.09.2018 02:37:53; message=Pending operation 172 started: 'Volume-Image erstellen'.
id=10; date/time=02.09.2018 02:40:18; message=Pending operation 172 started: 'Volume-Image erstellen'.
id=11; date/time=02.09.2018 02:40:18; message=Die folgenden Backups wurden erfolgreich erstellt:X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s2_v1.tib
id=12; date/time=02.09.2018 02:40:18; message=Backup-Archiv validieren Speicherort: X:\Mein Backup\Samsung SSD 850 PRO 1TB_inc_b3_s2_v1.tib
id=13; date/time=02.09.2018 02:40:18; message=Pending operation 4 started: 'Backup-Archiv validieren'.
id=14; date/time=02.09.2018 02:40:33; message=Die spezifizierte Datei existiert nicht: .; line_tag=0x4D3F22948E29F1C7
Error_Code=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
id=15; date/time=02.09.2018 02:40:33; message=Die spezifizierte Datei existiert nicht.; line_tag=0x1D8EAB676A3F695B; hide=1
id=16; date/time=02.09.2018 02:40:33; message=Die spezifizierte Datei existiert nicht.; line_tag=0x6517E0ECF4E10266; hide=1
id=17; date/time=02.09.2018 02:40:33; message=Cannot perform this operation in quiet mode. (0x103F1) $module = ti_demon_vs_6595 TrueImage::Archive::ArchiveMsgReadCallbackProcessor::ProcessReadCallback: <link url='execute://%VS_PATH%\Common7\IDE\devenv.exe @k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp /command Edit.GoTo 983'> k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp(983)</link> (0x1E50023) $module = ti_demon_vs_6595 TrueImage::Archive::ArchiveMsgReadCallbackProcessor::ProcessReadCallback: <link url='execute://%VS_PATH%\Common7\IDE\devenv.exe @k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp /command Edit.GoTo 984'> k:\6595\products\imager\archive\impl\operations\archive_message_callback.cpp(984)</link>
id=18; date/time=02.09.2018 02:40:33; message=Terminated by user.
id=19; date/time=02.09.2018 02:40:38; message=Senden der E-Mail-Benachrichtigung fehlgeschlagen.
id=20; date/time=02.09.2018 02:40:39; message=Batch operation has been terminated by user.
Start= 02.09.2018 02:37:05
Finish= 02.09.2018 02:40:39
Total Time= 00:03:34
Have you used the Cancel (to ignore) option for each missing file?
As to the best of my knowledge: no! But I must admit that I don't have a clue where to choose this option ...
Best regards
reinhardz
Allegato | Dimensione |
---|---|
460553-151960.jpg | 178.66 KB |
- Accedi per poter commentare

Thanks for the screen shot of the files showing the files for your b3 version chain which looks to be complete, so it is possible that the missing version 1 file is for an earlier version chain for this same backup, i.e. b2 or b1?
When you perform a manual Validation operation, you should be given a pop-up panel for each missing file with options to Retry, Browse to locate the file, or Cancel or Ignore to ignore the missing file. The Ignore option should be taken when the file does not exist or has been deleted manually. This action should then modify the Acronis Database to reflect the true status of files for the validated task.
In the above pop-up message, version 1. referred to my Download_full_b8_s1_v1.tib file which I had manually deleted to trigger the error, but which at that point was the first file of the configured backup files scheme which was set to 'Store no more than 3 recent version chains' and was creating only Full backups each time. I mention this because 'version 1.' can be misleading without understanding the full context for the backup files.
- Accedi per poter commentare

Steve Smith wrote:Thanks for the screen shot of the files showing the files for your b3 version chain which looks to be complete, so it is possible that the missing version 1 file is for an earlier version chain for this same backup, i.e. b2 or b1?
When you perform a manual Validation operation, you should be given a pop-up panel for each missing file with options to Retry, Browse to locate the file, or Cancel or Ignore to ignore the missing file. The Ignore option should be taken when the file does not exist or has been deleted manually. This action should then modify the Acronis Database to reflect the true status of files for the validated task.
As I mentioned in my original post I had to realize on Sept 1st that ATI hadn't stored any backup since Aug 20th. Therefore I manually started a backup at the end of that day's "session" expecting to find a full backup in the backup folder the next day. To my surprise there were two backup files, for which you gave the following explanation:
Your screen image of the backup files shows simply that your latest full backup image has been split into 2 parts as indicated by having the same name but with _v1 & _v2 in the name. Both of these files are required for a recovery and their total size (205GB + 253GB = 458GB approx.).
Therefore, when the above panel popped-up (thank you very much, now I know, where to find the Cancel/Ignore options) I guided ATI by klicking "Browse" to version 1 with which ATI seemed satisfied thereupon resuming the validation.
Shouldn't the red marked file not be the right "version 1"?
Thanks for advices
reinhardz
- Accedi per poter commentare

Reinhardz, as I mentioned in my last post, 'version 1' does not necessarily mean a file with _v1 in the name, rather it means the first available version of a file within the stored version chains available.
My best recommendation is to click on the 'Ignore this version' button when this error is shown, then continue running the validation to see if any more errors are shown?
- Accedi per poter commentare

Steve Smith wrote:Reinhardz, as I mentioned in my last post, 'version 1' does not necessarily mean a file with _v1 in the name, rather it means the first available version of a file within the stored version chains available.
Please excuse that misunderstanding of mine.
My best recommendation is to click on the 'Ignore this version' button when this error is shown, then continue running the validation to see if any more errors are shown?
Yesterday I unfortunately couldn't remenber the contents of the panel; today I had to realize that there was no "Ignore" option: I only had the choice between "Repeat", "Cancel" and "Browse".
I'll start the next validation only after ATI has stored a new full backup.
Best regards
reinhardz
- Accedi per poter commentare

There may be some differences in the pop-up panel between versions involved here, my panel was from ATI 2019 which did offer an Ignore button, whereas yours from ATI 2016 doesn't do so. The Cancel button here should work the same as Ignore if I understand correctly.
- Accedi per poter commentare

Ich würde einen ganz neuen Backuptask erstellen, das ein Backup-Archiv ohne das es jemand eingestellt hat sich aufteilt, ist nicht normal.
- Accedi per poter commentare

Steve Smith wrote:There may be some differences in the pop-up panel between versions involved here, my panel was from ATI 2019 which did offer an Ignore button, whereas yours from ATI 2016 doesn't do so. The Cancel button here should work the same as Ignore if I understand correctly.
Unfortunately, having clicked "Cancel" the validation stopped:
"Validation was stopped by user."
Best regards
reinhardz
- Accedi per poter commentare

G. Uphoff wrote:Ich würde einen ganz neuen Backuptask erstellen, das ein Backup-Archiv ohne das es jemand eingestellt hat sich aufteilt, ist nicht normal.
Das hat mich allerdings auch gewundert ...
Aufgrund der Voreinstellungen sollte morgen oder übermorgen aber sowieso ein neues vollständiges Backup erstellt werden. Schaun mer mal, was die Validierung dann ergibt ...
Ciao
reinhardz
- Accedi per poter commentare

G. Uphoff wrote:Ich würde einen ganz neuen Backuptask erstellen, das ein Backup-Archiv ohne das es jemand eingestellt hat sich aufteilt, ist nicht normal.
All's well that ends well (almost...).
According to schedule, a new full backup was saved tonight; previously I had set a check mark in the options "Validation after backup".
Today I could make out that the full backup was saved to a single file this time. The log was without any error messages! But in spite of this fact I had to find the same message on the start page of ATI as can be seen in my post as of Fri, 09/07/2018 - 15:12: "Validation was stopped by user."
Apparently, the last full backup, which was split into two files (how come?), was the source of all evil.
For all help thanks again
reinhardz
- Accedi per poter commentare