Salta al contenuto principale

How to upgrade from Seagate DiscWizard w/o DiscWizard?

Thread needs solution
Beginner
Messaggi: 1
Commenti: 2

I have thrre seagate drives configured in a RAID5 array and one USB seagate drive on a Windows 10 desktop. DiscWizard refused to install. SeaTools calls the RAID5 array serial number as RAID5-1. How do I tell these software that I have an all Seagate hard drive system.

Seagate support suggested that I can upgrade to the True Image 2016. But I do not feel like paying the full price instead of the $29 upgrade cost. Are there any official Acronis work around? That is to allow me to qualify for the upgrade without physically installing the DiscWizard on the computer.

0 Users found this helpful
Beginner
Messaggi: 1
Commenti: 2

Any Acronis user has RAID array on your computer? How well does Acornis support RAID created under the Intel ICH10R hub controller? The ICH10R AHCI Driver for Microsoft Windows 10x64 works very well so far.

The RAID is partitioned into 3 drives. Will I be able to clone ONLY the C: drive where my OS and major applications (MS Office etc.) are to a new SSD that I want to add?

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Messaggi: 250
Commenti: 7092

Hello keilau02@yahoo.com,

Thank you for your posting! Here you will find the general information on the RAID support in Acronis True Image. I would recommend to install a trial version in order to check the compatability with the specific hardware. Please be aware that the cloning is supported only for basic disks.

Thank you,

DiscWizard utility from Seagate is needed to determine 3TB at the moment the program refuses to install writes that the computer is not plugged HDD from Seagate although the first 2 TB visible in my computer...

Hard drive 3.5 HDD, Seagate ST3000DM001 I got from PC after-sale...

And I'm trying to connect it through USB 3.0 through a special device... with an additional 12V adapter...

help to make the most of my not so hard: ATA ST3000DM001-9YN1 USB Device here's how: SATA ST3000DM001-9YN1 (if not mistaken) Or you need to make sure that she was made...

1) http://meson.ad-l.ink/6Yrzl7r4w/image.png 2) http://meson.ad-l.ink/6pHrnzTfg/image.png 3) http://polariton.ad-l.ink/6zwP9hQtt/image.png

frestogaslorastaswastavewroviwroclolacorashibushurutraciwrubrishabenichikucrijorejenufrilomuwrigaslowrikejawrachosleratiswurelaseriprouobrunoviswosuthitribrepakotritopislivadrauibretisetewrapenuwrapi
Messaggi: 250
Commenti: 7092

Hello Leonid,

If the external drive is correctly displayed in Disk Management, but you still get this error message saying "the drive is not installed", we'd recommend contacting the vender, Seagate in this case. Only the hardware manufacturer can help with this type of the issue and activation of the OEM software that comes with the drive. 

Seagate Support: http://www.seagate.com/www/en-us/about/contact_us/ 

Thank you,