Clone M.2 SSDs in RAID0
Hello!
I'm planning to buy the new Razer Blade Pro, which has 2xNVMe M.2 SSDs in RAID0.
let's say I want to replace those ssds with a pair of Samsung 960 Pro.
Is there any possibility I will be able to clone disks with true image? I also have a desktop computer and I can place ssds there.
Thank you!


- Accedi per poter commentare


Agree with Bobbo here. You WILL have to use the MVP tool to create a WinPE Recovery Media if you want it to be a simple process.
- Accedi per poter commentare

Ok, I've figured out what is MVP tool, windows ADK and rescue media:)
Thats how I see the process:
1. Install Acronis True Image, Windows ADK.
2. Run MVP Tool to create USB rescue media with all necessary drivers.
3. Connect external USB HDD with the size greater than used space on existing raid-0 array.
4. Boot with rescue media, make full image of raid-0 disk (with destination - external HDD).
5. Swap SSDs, build raid-0 array.
6. Boot with rescue media and restore saved image to new raid-0.
Correct?
- Accedi per poter commentare

Trali, that looks fine to me, but would suggest an extra step in the process after step 3.
3a. Boot the rescue media and test that you can see the internal and external drives correctly.
The rescue media needs to be booted in the same mode as your Windows OS uses, which for most new systems should normally be in UEFI mode, so if you see more than one option when selecting the USB boot device, ensure that you select the correct one, as you may see both Legacy and UEFI options, depending on what the system BIOS offers.
See webpage: Check if your PC uses UEFI or BIOS for more information.
- Accedi per poter commentare

Along with Steve's recommendation that should do it.
- Accedi per poter commentare

Thank you!
Will try as soon as I get the laptop.
- Accedi per poter commentare