ATIH ver 10 cloning problems
Hi - I'd be very grateful if anyone can help or advise me.
I use ATIH vers 10 to clone the drive in my PC with XPpro, to another drive of the exact same make & size, IDE Seagate 160gb. My source drive has 3 Primary partitions, which hold 3 different versions of Windows. It also has 4 Logical drives in an Extended partition - 3 hold data & personal stuff, & the 4th is a small 1gb partition for my XOSL Boot Manager - the PC boots to this Manager to offer me the 3 OSs.
I clone using an ATIH vers 10 bootable CD, from the source to target drive. Once completed, I replace the source drive with the target drive as a single master.
The problem is, that the cloned drive does NOT boot to the Boot Manager! If I check the drive, all the 3 primary & 3 logical drives are shown as being cloned, but the small logical partition is either shown as 'Unallocated' or missing completely!
I have to fix this by using a partition tool to repair the Unallocated or missing partition, then re-install my Boot Manager. But this shouldn't be necessary!
Can anyone advise why this happens?
Many thanks if you can help.
Colin

- Anmelden, um Kommentare verfassen zu können