HPE ProLiant DL360 &DL380 Gen10 Server Models Not booting up
We have tried restore to hp proliant server dl 360 and 380 ,successfully restore the image to it.
its giving bluescreen error,
Applied UR also but still its giving issue not booting up
Tried with both winpe as well as the linux bootable media.
still we have the same issue.
tried both D to D as well as the Volume recovery same issue.
please help us if we have any solution for it

- Anmelden, um Kommentare verfassen zu können

Hello Sineesh.
Unfortunately, you have not shared with us the error code you receive on BSoD. Thus, I recommend that you follow the solution from this KB article if this is the "Stop 0x0000007B" error. Otherwise, please follow instructions from another KB article with common troubleshooting bootability issues steps.
- Anmelden, um Kommentare verfassen zu können

Hi Maria,
I think Acronis Backup / Protect 12.5 / 15 still conflict with HPL Dl380 Gen10 Server - we've had same issue, and Acronis supporter remote and check but not solve !
Pls, check in your RD team with backup ( on dell/IBM/ vmware/hyper-v ....) and restore to HPE DL380 Gen10. you'll know our pain !
- Anmelden, um Kommentare verfassen zu können

Frank Dang wrote:Hi Maria,
I think Acronis Backup / Protect 12.5 / 15 still conflict with HPL Dl380 Gen10 Server - we've had same issue, and Acronis supporter remote and check but not solve !
Hi Frank, sorry to know about the issue! Would you mind sharing the ticket ID, so that we can look into the situation?
- Anmelden, um Kommentare verfassen zu können

Hi Ekaterina,
i've trace my Technical.
He opened 2 case ID:
- 04531914
- 0455522
But the last tried, he used Veeam backup instead (backup Dell/ HPE DL380 gen9) and restore to HPE DL380 Gen 10 and respond to Acronis Team that he did restore successfull, so your team not know it.
we'll open another case because the failure restore still remain !
- Anmelden, um Kommentare verfassen zu können

Hello Frank,
thank you for sharing your support case numbers.
According to the information provided in your latest case, some drivers were missing in your Acronis bootable media and as a result, the OS was unbootable. You were recommended creating Acronis based WinPE media: https://kb.acronis.com/content/60140
You were also advised to make sure to inject license and all the drivers for the questioned machine while creating a WinPE media, enable Acronis Universal Restore option and follow these step-by-step restoration instructions: https://kb.acronis.com/content/35681
- Anmelden, um Kommentare verfassen zu können

Hi Maria,
sure, but we did it as your guide but not successfull so many time.
If you can talk with Technical and R&D team, a easiest way, they can setup in their lab.
Restore backup from another device (window Server 2012/R2, 2016, 2019) to Physical HPE DL380 Gen10. always fail
- Anmelden, um Kommentare verfassen zu können